1. DL manuals
  2. Legend
  3. TV
  4. LE3933
  5. Manual

Legend LE3933 Manual

Summary of LE3933

  • Page 1

    1 table of contents important safety instructions.................................................................................................................................... 2 view of unit...........................................................................................................

  • Page 2

    2 important safety instructions thank you for choosing our product. Please read this manual carefully and observe all safety and operating instructions. Store the manual in a safe place for later reference. Caution 1. The product contains a low-power device. In order to ensure the safety of the lase...

  • Page 3

    3 important safety instructions notes: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product. D...

  • Page 4: View Of Unit

    4 view of unit front panel 1. Color tft screen presents high resolution picture. 2. Power indicator in active mode, it is green; in standby mode, it turns red. 3. Remote sensor remote sensor window for the remote control. 4. Power button press to switch on or off the device (enter or exit the standb...

  • Page 5: View Of Unit

    5 view of unit rear panel 1. Usb port connect the usb device. 2. Audio out jack connect to audio receiver. 3. Composite in jacks connecting for av signal input in av mode. 4. Component in jacks connecting for the y/p b /p r input in component mode. Y/p b /p r share the same audio jack with composite...

  • Page 6: Remote Control

    6 remote control remote control drawing 1. Power button press to enter or exit standby mode. 2. Display button press to display the reference information of the current mode. 3. Play/pause button press to start or pause the playback in usb mode. 4. /buttons press to return to the previous file or sk...

  • Page 7: Remote Control

    7 remote control 19. Aspect button select the viewable display aspect options: normal, wide, zoom, or cinema. Vga and dvi mode is full 100%, point to point. 20. Vol+/- button press to increase or decrease the volume. 21. Last buttons press to switch between the current channel and previously viewed ...

  • Page 8: Remote Control

    8 remote control preparation of remote control 1. Softly push the back cover to open the battery compartment. 2. Insert two batteries (1.5v, size aaa), please make sure the polarity matches the marks inside the compartment. 3. Softly press the back cover to close it. Under normal use the battery wil...

  • Page 9: System Connections

    9 system connections do not connect the power cord until all other connections have been made. Ensure that you observe the color code when connecting audio and video cables. Connecting to the power supply connect the plug of the power cord on the rear panel of the unit to the ac100~240v wall outlet....

  • Page 10: System Connections

    10 system connections connectingexternal equipment to component video in (ypbpr) 1. When connecting external equipment to your television, match the colors of the connecting jacks (video: blue, green, red; audio: white / red ). 2. Connect the optional component video cables (blue, green, red) (not i...

  • Page 11: System Connections

    11 system connections connecting to a pc the unit can be connected to a pc via the vga cable and pc audio cable. 1. Connect one end of the vga cable to the vga jack on the jack panel of the unit and the other end to the pc vga output. 2. Connect one end of the audio cables to the pc in jack on the j...

  • Page 12: Basic Operation

    12 basic operation turning the tv on and off connect the power adaptor to wall ac outlet. A front mounted indicator light will be illuminated red indicating the tv has power. Press the power button on the remote control or the tv set. The tv’s indicator light will be illuminated blue indicating the ...

  • Page 13: Channel

    13 tv operation and system setup press the menu button to display the setup menu. It includes different categories, such as channel, picture, audio, time, setup and lock. You can change the category using the ◄► buttons and press the enter button or ▼button to enter it. Using the ▲▼ buttons and pres...

  • Page 14

    14 tv operation and system setup picture mode press the ▲▼ buttons to select picture mode and then press the enter button, the available picture modes will be listed on the screen. With the ◄► buttons you can select dynamic, standard, theater or personal. If you select personal, you can set the leve...

  • Page 15: Audio

    15 tv operation and system setup audio the sound settings include the options for equalizer, mts, digital output, surround sound, etc. Equalizer press the ▲▼ buttons to select equalizer and then press enter, the available sound modes will be listed on the screen. With the •• buttons you can select s...

  • Page 16: Setup

    16 tv operation and system setup sleep timer set the sleep timer to have the tv to enter the standby mode automatically after the preset time interval. Press the buttons to select sleep timer and press the ▲ ▼ enter button to enter the submenu, then press the ▲ ▼ buttons to select the preset minutes...

  • Page 17: Lock

    17 tv operation and system setup menu language this option is for setting the menu language. Press the ▲▼ buttons to select menu language and press the enter button to enter the submenu. Press the ▲▼ button to select the menu language. Transparent press the ▲▼ buttons to select transparent and press...

  • Page 18: Media Playback

    18 media playback this unit is designed with a usb ports so that you can connect your usb device and playback the files in the usb device. Notes: the recognition speed of a usb storage device may depend on each device. Please do not turn off the tv or unplug the usb device when the connected usb sto...

  • Page 19: Media Playback

    19 media playback 3. In the music submenu, press the▲▼◄► direction button to select your storage device and press the enter button to open it. The songs list will appears. 4. In the songs list, you can use the ▲▼◄►buttons to select one of them and press enter or button to play it. Press exit button ...

  • Page 20: Troubleshooting

    20 troubleshooting symptom check item there is no sound. Make sure the system connection is correct. Make sure the speakers are not muted. Set the correct sound mode. Led has no display. Make sure the unit is turned on and the connections are correct. Make sure the power adapter is correctly connect...

  • Page 21: Specifications

    21 specifications model le3933 screen size 39-inch led native resolution 1920 × 1080 pixels brightness 300 cd/ m 2 contrast ratio 1200 :1 response time (ms) 8 ms speaker output 7w+7w ac input 100-240v ~ 50/60hz power consumption standby power dimension (with stand) 890 mm × 230 mm ×582 mm（w × d × h）...