1. DL manuals
  2. Leggett & Platt
  3. Household Appliance
  4. Sleep Comfort
  5. Owner's Manual

Leggett & Platt Sleep Comfort Owner's Manual

Manual is about: Adjustable Beds

Summary of Sleep Comfort

  • Page 1

    99301076-b edr12041 10/12 owners manual [ adjustable bases].

  • Page 3

    Advisory ...................................................................................................................... 4 acoustics .................................................................................................................... 6 installation ...............................

  • Page 4

    Sleep comfort™ adjustable base owners manual 99301076-b 4 important information read the following information carefully before using this product warranty warning do not open any control boxes, motors or remote control devices (with the exception of the remote control and power down box battery com...

  • Page 5

    Sleep comfort™ adjustable base owners manual 99301076-b 5 advisory fcc compliance components meet class b digital device rating (part 15, fcc rules) for residential use. Adjustable bases generate, use and may radiate radio frequency energy. Radio communication may be affected if not installed and op...

  • Page 6

    Sleep comfort™ adjustable base owners manual 99301076-b 6 acoustics lifting/lowering mechanisms the lift/lower feature will emit a minimal humming sound during operation. This is normal. During operation, the lift arm wheels make contact with the platform support of the base. This applies slight ten...

  • Page 7

    Sleep comfort™ adjustable base owners manual 99301076-b 7 installation 4” leg (4 pieces) 7” leg (4 pieces) for installation and setup, complete the numbered procedure indicated below and on the following pages: push-in locking leg caster (4 pieces) screw-in locking leg caster (4 pieces) mattress ret...

  • Page 8

    Sleep comfort™ adjustable base owners manual 99301076-b 8 installation step 2 carefully lift the adjustable base frame from the shipping carton, keeping the unit top-side-down. Step 3 install (4) legs into the base frame. Simply screw each leg into a tapped hole at each corner of the base frame ( fi...

  • Page 9

    Sleep comfort™ adjustable base owners manual 99301076-b 9 figure 2: power down battery compartment door removal. Press in (slightly) and push down to remove battery compartment door figure 3: power down box battery installation and battery compartment door reinstallation. Battery orientation is indi...

  • Page 10

    Sleep comfort™ adjustable base owners manual 99301076-b 10 step 6 remove the plastic packaging from the adjustable base frame. Carefully rotate the base frame over to position the base top-side-up. Step 7 plug electrical power cord into a working, grounded electrical outlet. Note: an electrical surg...

  • Page 11

    Sleep comfort™ adjustable base owners manual 99301076-b 11 b. Place mattress retainer ends into grommeted holes in top surface of adjustable base ( figures 5 and 6). Press down until horizontal retainer section is flush against base. Figure 5: mattress retainer installation. Figure 6: mattress retai...

  • Page 12

    Sleep comfort™ adjustable base owners manual 99301076-b 12 sc-mr2 remote control function note remote control requires four (4) aaa size batteries. To conserve battery life, the transmitter turns off all functions when any button is pressed for more than 50 seconds. Transmission indicator light veri...

  • Page 13

    Sleep comfort™ adjustable base owners manual 99301076-b 13 in case of a power outage, press and hold the learn button on the power down box to lower the base to the flat position ( figure 7). This function is only for lowering the base and will not operate the base to any other position. The two (2)...

  • Page 14

    Sleep comfort™ adjustable base owners manual 99301076-b 14 sc-mr2 remote control programming (1 remote control - 1 base) the two step procedure below is required to program 1 remote control to operate 1 base. Before beginning, make certain the base is plugged into a working grounded electrical outle...

  • Page 15

    Sleep comfort™ adjustable base owners manual 99301076-b 15 sc-mr2 remote control programming (2 remote controls - 1 base) the three step procedure below is required to program 2 remote controls to operate 1 base. Before beginning, make certain the base is plugged into a working grounded electrical o...

  • Page 16

    Sleep comfort™ adjustable base owners manual 99301076-b 16 sc-mr2 remote control programming (1 remote control - 2 bases) the three step procedure below is required to program 1 remote control to operate 2 bases. Before beginning, make certain the base is plugged into a working grounded electrical o...

  • Page 17

    Sleep comfort™ adjustable base owners manual 99301076-b 17 sc-mr2 remote control programming (2 remote controls - 2 bases) the six step procedure below is required to program 2 remote controls to operate 2 bases. Before beginning, make certain the base is plugged into a working grounded electrical o...

  • Page 18

    Sleep comfort™ adjustable base owners manual 99301076-b 18 sc-mr2 remote control programming (separating 2 bases) the six step procedure below is required to separate 2 remote controls from operating 2 bases. One remote control per base operation will result. Before beginning, make certain the base ...

  • Page 19

    Sleep comfort™ adjustable base owners manual 99301076-b 19 accessories optional equipment contact customer service toll free (800-888-3078) to order the accessories indicated in the chart below. 4b2385 4b2284 4b2100 4b1209 4b1792 4b1034 4b6117 4b6118 glides 1 (set of 4, replaces legs) 3” legs (set o...

  • Page 20

    Sleep comfort™ adjustable base owners manual 99301076-b 20 step 1 on one side of bed base, loosen jam nut on board end of turnbuckle assembly using a ½” wrench ( figure 2). Threads are right-hand threads. Repeat on other side of bed base. Step 2 on one side of bed base, loosen jam nut on carriage en...

  • Page 21

    Sleep comfort™ adjustable base owners manual 99301076-b 21 troubleshooting if the adjustable base fails to operate, investigate the symptoms and possible solutions provided in the chart below: symptom solution • verify power cord is plugged into a working, grounded electrical outlet. A grounded, ele...

  • Page 22: Warranty Information

    Sleep comfort™ adjustable base owners manual 99301076-b 22 sleep comfort™ warranty sleep comfort™ adjustable beds (sc) warrants for life the entire bed against defects in material or workmanship. Warranty - parts if a part needs replacement, the purchaser must return the part to sc freight prepaid. ...

  • Page 24

    [ adjustable bases] lpadjustablebases.Com © 2012 leggett & platt adjustable bed group, a division of leggett & platt, incorporated assembled in usa nationwide customer service.