1. DL manuals
  2. LockStateConnect
  3. Thermostat
  4. LS-60
  5. Operation Manual

LockStateConnect LS-60 Operation Manual

Summary of LS-60

  • Page 1

    Pg 1 ls-60 operation guide the ls-60 programmable communicating thermostat operates via a high-quality, easy-to-use touch screen. To program or adjust your ls-60, simply touch your finger firmly to the screen. The screen will automatically light up and you will hear a “beep.” do not use a sharp or met...

  • Page 2: Home Screen

    Pg 2 pg 2 control screens home screen before you operate the /6 please get familiar with these basic control screens. All the /6 functions are accessed through these screens: home, menu, program and manual. The /6 touch screen technology allows you to select (by touching) an item and change it using...

  • Page 3: Menu Screen

    Pg 2 pg 2 pg 3 menu screen the menu screen is the gateway to many functions or settings of the /6. It is displayed when you press the menu button. [see page 10 for details] set day touch this area to set the day of the week. Set time touch this area to set the time of day. Left arrow goes back, righ...

  • Page 4: Program Screen

    Pg 4 pg 4 program screen the stand alone program screen sets the /6 control for your home hvac system with out a central controller. Press and hold prog for 10 sec to access it. After that it is displayed when you press the prog button. [see page 8 for details] program morn f copy day heat am set pr...

  • Page 5: Manual Screen

    Pg 4 pg 4 pg 5 manual screen the manual screen control screen is where you can make temporary changes to your /6’s operation. From the full home screen, touch the main temperature display to use this screen. [see page 13 for details] f hold emer holiday heat target temperature room temperature retur...

  • Page 6: Simple Home Screen

    Pg 6 pg 6 simple home screen make this the default home screen for your /6 by holding the prog button for 12 seconds. This simple home screen gives you limited access to the /6’s on screen display and no programming capability. It makes the /6 behave like a simple one setting thermostat. The simple ...

  • Page 7

    Pg 6 pg 6 pg 7 initial settings press menu to to access the following commands (from home screen). Set day of the week touch the day of the week area to cycle through the days of the week to select the current day. Set time of day touch the time of day arrows to move the time selection forward or ba...

  • Page 8

    Pg 8 pg 8 auto-run program the /6 comes pre-programmed with an epa approved program. This program is recommended by the epa for energy efficiency. We strongly recommend that you auto-run this program for one week, and see if it works for you. If it does not fit your needs you can always input a cust...

  • Page 9

    Pg 8 pg 8 pg 9 program cont. Select the day you want to program. The day of the week starts at su - sunday and can be advanced to the day you want to program. Touch the day of the week area to cycle through the days of the week to the desired day. Select the time slot (period) you want to program (m...

  • Page 10

    Pg 10 pg 10 menu screen functions press menu to bring up menu screen. Time of day touch the left (down) or right (up) arrows next to the time display to set the current time (1 minute per touch). Touch and hold the arrow for fast time set (15 minute jumps). Day of week touch day area to select prese...

  • Page 11

    Pg 10 pg 10 pg 11 f c set - touch this to switch the temperature display scale from of to oc . Filter - air filter alert - the ls-60 can be programmed to remind you when the hvac sytem’s air filter needs changing. Touch filter. The display will show the usage to date. Touch filter for over 3 seconds...

  • Page 12: Calibrate

    Pg 12 pg 12 calibrate your thermostat was accurately calibrated at the factory to ±1° f of actual ambient temperature. You do have the option, however, to change the display temperature to match that of a previous thermostat, or to match another thermostat already in your home. The range of change i...

  • Page 13

    Pg 12 pg 12 pg 13 manual screen functions the ls-60 has 4 manual override commands. The manual screen is accessed by touching the large current temperature display in the middle of the home screen. Important: the mode must be in heat or cool to access the manual screen. Temporary override touch the ...

  • Page 14

    Pg 14 pg 14 weekly program. To use it touch holiday on the temporary screen. The default holiday program is shown below. To modify this program, touch the program button and then touch the day area until holiday appears (after sat). The default holiday program is set as 2 time slots; all day (same t...

  • Page 15

    Pg 14 pg 14 pg 15 mode button the mode button sets the ls-60 to heat cool or off modes. Press it once to step to the next mode. If the ls-60 is in off and you want to return to the mode you were previously in, touch the off indicator on screen. Fan button the fan control is normally in auto mode, me...

  • Page 16: Caution

    Pg 16 pg 16 compressor protection the ls-60 has a minimum cycle time of 4 minutes to protect your compressor in cool and in heat pump (if you have one). The home screen will show a small clock and a/c during this time and the compressor will not come on until the 4 minute delay is over. Communicatin...