Equipment operation manual loctite ® hysol ™ 050 hot melt applicator 120 volt part no. 98544, 230 volt part no. 98546 loctite ® hysol ™ 050-ht hot melt applicator 120 volt part no. 98545, 230 volt part no. 98547.
Safety instructions do not touch the nozzle or molten adhesive with bare skin as they are hot – the operating temperature of the loctite ® hysol ™ 050 and loctite ® hysol ™ 050-ht is approximately 400°f (200°c). Protective gloves should always be worn. Careless handling can cause skin burns. If molt...
Application hints as with all adhesives, performance depends on conditions of use. Suggestions or recommendations contained herein are for guidance only, since actual conditions of use are outside the supplier’s control. • ensure that the surfaces to be bonded are dry, free from dust, grease, and lo...
