- DL manuals
- Logic Controls
- Keyboard
- LK7000
- User Manual
Logic Controls LK7000 User Manual
Summary of LK7000
Page 1
Model: lk7000 programmable matrix keyboard 119 keys with built-in scanner and msr user manual.
Page 2
Notice the manufacturer of the pos programmable keyboard makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or conseque...
Page 3: Table of Contents
Table of contents features ............................................................................... 1 carton contents .............................................................. 2 hardware connections ................................................. 3 functional test ........................
Page 4
Features • optional left or right laser bar code reader • optional credit card reader • contemporary design • fully programmable • matrix layout • tactile mechanical key switches • keylock for multiple program layers • multiple shift layers • true keyboard wedge function, operates with or without co...
Page 5
2 carton contents lk7000 1. Keyboard, model lk7000 2. Computer interface cable - rj11 6-pin male 3 . Programming utility software and user's manual disk 4. Legend label sheet.
Page 6
3 hardware connections the lk7000 can be connected to an ibm101 pc, xt, at or clone computer, ps/2 computer, or computer terminal. The following diagram shows how the keyboard connects to the computer and standard keyboard or other keyboard peripheral (magnetic stripe reader, scanner, etc.). Note: b...
Page 7
Functional test for testing purposes, your lk7000 keyboard was pre-programmed with a template called lk7000 .Tpl. The following simple steps will verify that the keyboard is in good working condition: 1. Follow the hardware connections procedure described earlier in this manual to connect the lk7000...
Page 8
5.
Page 9
6 utility disk contents all lk7000 keyboards come with a utility software disk. This disk contains several important files: lk7000d.Exe - use this utility with or without the keyboard being attached. It is used to program the keyboard. For a complete description of how this program works see the sec...
Page 10
7 starting the lk7000d .Exe program this program can be used with or without the keyboard being attached to the computer. Note that the pc must be booted up in dos before starting the program. It will not run properly under windows dos prompt. To start the program, type lk7000d at the lk7000 dos pro...
Page 11
8 programming the lk7000 keyboard the following procedure will show you how to program your lk7000 with standard (keyboard) alphanumeric characters. The keyboard can be programmed with either ascii or scan code information. The default mode is the ascii code mode. The following procedure assumes bot...
Page 12
9 5. Type s to save the programmed data into the lk7000 directory. You can select up to an 8 character name. It will be saved with a .Tpl extension. 6. Press esc to terminate the data transfer menu. 7. Press f10 followed by y to exit the utility program. 8. To verify that your program has been succe...
Page 13
Advanced programming the lk7000 pos keyboard can be programmed with all special control and function keys such as the shift, ctrl, alt, f1 through f12, and the up/ down/left/right arrow keys. The procedure to program these special keys is shown below: 1. Start the lk7000 utility program. 2. Select t...
Page 14
Special features of the lk7000 besides being able to program all the keys of an ibm101 keyboard, the lk7000 has also incorporated three state-of-the-art features which will add flexibility and functionality to the keyboard. Inter-string delay this feature allows for a time delay(s) to be installed a...
Page 15
Multi-level definition this feature can increase the apparent number of programmable keys by allowing you to program different levels into any cell. For every different level you program you must select another key to be a “shift level” key. Programming is accomplished in the normal manner. After pr...
Page 16
8. Change the programming mode of this cell to the scan-code mode (f8). Depress and hold the alt key while depressing the letter a twice. Two triangles inside brackets will appear on the programming line. 9. To use this feature in your application is extremely simple. When medium coffee is desired j...
Page 17
Special configurations the keyboard can be set up with many different programming options. To activate the configuration menu screen press f3. By depressing the high- lighted letter in each option, the program will enable or disable that option. The default settings are shown in the graphic below. S...
Page 18
Description of special configuration menu f3 send break-code for scan-codes - enables or disables the transmission of break codes for each scan code programmed into the keyboard. Enable beep while a key pressed - enables or disables the entire keyboard from beeping when any key is depressed. No beep...
Page 19
Description of special configuration menu f3 (continued) enable rs232 output - enables or disables the output of the keyboard to the rs232 port (db9 connector). If this option is set to yes then the protocol settings must be set to mirror the application software. Baud rate - this option selects 240...
Page 20
The lk7000 keyboard, working in conjunction with the lk7000 .Exe utility software, can perform the following powerful functions: * save programmed data as a template file (.Tpl) in both the keyboard and the hard drive of the computer. To save programmed data to the keyboard use the w (write to keybo...
Page 21
Programming the keyboard 1.Use the utility software supplied to program up to 256 alphanumeric characters per key. Utility program will write to and read from computer disk memor y. 2. Keyboard supports computer control keys (shift, ctrl, alt, f1 through f12) and all arrow keys). Connector pinouts j...
Page 22
Addendum scanner position the lk7000 , a matrix programmable keyboard with built-in scanner, was designed with the end user in mind. The scanner can be factory installed on either side of the keyboard, giving the end- user the versatility required in todays applications. Pitch angle to accomodate di...