1. DL manuals
  2. Logic Controls
  3. Keyboard
  4. LK8000 Series
  5. User Manual

Logic Controls LK8000 Series User Manual

Other manuals for LK8000 Series: Specifications
Manual is about: LK8000 series Programmable QWERTY Keyboard, 122 keys with integrated touchpad and 2 mouse buttons

Summary of LK8000 Series

  • Page 1

    Programmable qwerty keyboard 122 keys with integrated touchpad and 2 mouse buttons user manual lk8000 series.

  • Page 2

    2 lk8000 user manual rev. 1 notice the manufacturer of the pos programmable keyboard makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any i...

  • Page 3: Table of Contents

    3 lk8000 user manual rev. 1 table of contents features…………………………………………………………............. 4 carton contents……………………………………………………... 5 models……………………………………………………………………... 5 hardware connections……………………………………………. 6 functionaltest………………………………………………………… 7 utility disk contents………………………………………………... 8 inst...

  • Page 4

    4 lk8000 user manual rev. 1 features • 122 key qwerty keyboard with touchpad and 2 mouse buttons • optional integrated magnetic stripe reader • all 122 keys are programmable; 46 keys are relegendable and programmable • multiple layers of key definitions and multiple shift levels • programmed with a ...

  • Page 5

    5 lk8000 user manual rev. 1 carton contents lk8000 1. Keyboard, model lk8000 2. Computer interface cable - rj11 to male ps/2 mouse and keyboard interface (for lk8000u models: rj45 to usb type a interface) 3. Programming utility software and user’s manual disk 4. Legend label sheet 5. 2 keylock keys ...

  • Page 6

    6 lk8000 user manual rev. 1 hardware connections the lk8000 can be connected to a ps/2 computer, or computer terminal. The following diagram shows how the keyboard connects to the computer and standard keyboard or other keyboard peripheral (magnetic stripe reader, scanner, etc.). Note: before making...

  • Page 7

    7 lk8000 user manual rev. 1 functional test for testing purposes, your lk8000 keyboard was pre-programmed with a template called lk8000-l1.Tpl. The following simple steps will verify that the keyboard is in good working condition: 1. Follow the hardware connections directions on page 6 in this manua...

  • Page 8

    8 lk8000 user manual rev. 1 utility disk contents all lk8000 keyboards come with a utility software disk. This disk contains several important files: setup.Exe this utility will install the keyboard programming utility on your computer. Use this utility with the keyboard attached. Lk8000-l1.Tpl lk80...

  • Page 9

    9 lk8000 user manual rev. 1 installing the lci keyboard programming utility 1. Make sure the lk8000 is attached to the computer. 2. Double click the setup.Exe file on the utility diskette. 3. Select the destination folder and click “install” to start the installation process. Skip any warning messag...

  • Page 10

    10 lk8000 user manual rev. 1 menu commands [template] [new] clear all key definitions. [load] load key definitions from template file on disk. (*.Tpl) [save] save key definitions to template file on disk. (*.Tpl) [save as] save key definitions to template file on disk with new filename. (*.Tpl) [loa...

  • Page 11

    11 lk8000 user manual rev. 1 programming the keyboard 1. Connecting the keyboard for ps/2 versions: connect the lk8000 to the pc with the special interface cable provided. Plug the standard pc keyboard to the female ps/2 connector on the interface cable and the male ps/2 connector to the computer. F...

  • Page 12

    12 lk8000 user manual rev. 1 editing key definitions 1. Selecting keys to edit use shift key and the arrows keys on the standard keyboard to select the key for editing. Hold down the shift keyand hit the arrow keys until the key to be edited is being highlighted. 2. Checking key definitions the curr...

  • Page 13

    13 lk8000 user manual rev. 1 • for special function keys, use and to enter their scan code in this mode. Forexample, to program into the key position, hit first, followed by . To program , hit twice. • since the following 4 keys are used by windows, we cannot use + to program thesekeys: , , , . Thes...

  • Page 14

    14 lk8000 user manual rev. 1 o [shiftlevel*] multi-shift-level function key definition for different shift levels (* is from 1 to 9). To define a multi-shift-level function key, click on the icon and enter the level number. • decimal equivalent numeric values for ascii codes (only 1 to 240 allowed) ...

  • Page 15

    15 lk8000 user manual rev. 1 [shiftlevel2] key and then press the multi-definition key will send out level 2 definition, and so on. B. Inter-string delay • a delay time up to 100 seconds can be inserted between key stroke outputs by clicking on the icon on thetool bar or key edit→insert delay time o...

  • Page 16

    16 lk8000 user manual rev. 1 modifying properties of the keyboard after key definitions are finished, click on the item configuration→config kb properties on the menu bar or click on the “modify properties” icon on the toolbar to set or change programmable keyboard features. Config opos/jpos • you m...

  • Page 17

    17 lk8000 user manual rev. 1 delimited text template file the new programmable keyboard utility can import and export a delimited text file directly. The text file may have two columns and as many rows as number of keys (see the example .Txt file in the utility diskette). Columns are delimited by co...

  • Page 18

    18 lk8000 user manual rev. 1 key label color to identify the status of a key during template editing, the key label is displayed in three different colors. • black - the key is blank with no definition. • blue - when a template is loaded from file or read from keyboard, all keys that are not blank w...

  • Page 19

    19 lk8000 user manual rev. 1 in this example of the lk8000 template, the f17 key is a defined key and is indicated by the color blue. In this example of the lk8000 template, the f17 key is a modified key and is indicated by the color green..

  • Page 20

    20 lk8000 user manual rev. 1 programming examples 1. Special features to program key sequence then , the key need to be released before pressing . Otherwise,the definition will be interpreted as , f9>. • [ctrl][a][0f0][ctrl][f9] 2. Multi-shift-level function this function programs a key that contain...

  • Page 21

    21 lk8000 user manual rev. 1 token names for special function keys there are no ascii codes for some function keys. They have to be programmed with scan codes. In key definitions, the following symbols represent their scan codes. The token name symbols are case sensitive. They have to be entered exa...

  • Page 22

    22 lk8000 user manual rev. 1 [alt+printscreen] function key + [pad0] number key on keypad [pad1] number key on keypad [pad2] number key on keypad [pad3] number key on keypad [pad4] number key on keypad [pad5] number key on keypad [pad6] number key on keypad [pad7] number key on keypad [pad8] number ...

  • Page 23

    23 lk8000 user manual rev. 1 editing msr parameters (for keyboards equipped with optional msr) before editing the parameters, please refer to the user manual of the point-of-sale software or credit card verification software to find out what are the requirements on the output format. To configure th...

  • Page 24

    24 lk8000 user manual rev. 1 1. Edit the keyboard programming template; or load a template from a file; or read the template from the keyboard. In the programming utility main menu, click configuration on the menu bar and then click on [edit mr data]. You can also click the “mr data edit” icon on th...

  • Page 25

    25 lk8000 user manual rev. 1 enable lrc: enable lrc output for each track. If enabled, lrc will be sent as 2 hex characters. Hex values a to f (10 to 15) are represented by characters : ; and ? Respectively. 7. Enable start sentinel: enable individual track "start sentinel" output. Enable separator:...

  • Page 26

    26 lk8000 user manual rev. 1 specifications.