Logic Controls MR3000 User Manual - page 7
4
INTERFACE
MR3000
The MR3000 interfaces with the keyboard port of the computer. Two DIN5
connectors are provided to connect the MSR between the computer’s key-
board port and another keyboard peripheral (101 keyboard).
NOTE:
The electronics contained within the MR3000 will allow the
computer to boot up without the 101 keyboard being attached.
MR3000RS
The MR3000RS can interface with any
standard IBM RS232C interface. The
output connector of the MR3000RS is a
DB9 female connector.
D IN 5
M ale
DIN 5
Female
Pin #
Function
Pin #
Function
1
DCD
6
DSR
2
RXD
7
RTS
3
TXD
8
CTS
4
DTR
9
Not used
5
Sig. Gnd.
Default Protocol
Baud Rate - 9600
Parity - None
Data Bits - 8
Stop Bits - 1
DIN 5 M/F
Pin #
Function
1
Keyboard Clock
2
Keyboard Data
3
No Connection
4
Ground
5
+5VDC
DB9F Configuration