Logic L07DPF10 Instruction Manual - Setting Auto Run
13
Setting Items
Description
General Setup
Language
Set up the language of the OSD menu.
Brightness
Adjust the brightness of the screen.
The available options include: +3, +2, +1,
0, -1, -2, -3.
Contrast
Adjust the contrast of the screen.
The available options include: +3, +2, +1,
0, -1, -2, -3.
Saturation
Adjust the saturation of the screen.
The available options include: +3, +2, +1,
0, -1, -2, -3.
Auto run
Set the unit to run a specified mode
automatically when you switch it on.
Default
Reset all settings to the default settings.
Setting Auto Run
You can set the unit to run a specified mode automatically when you switch it on.
1. Select the SETUP icon on the main menu and then press the
button. The
Setup Menu appears on the screen.
2. Press the or buttons to select General Setup, and then press the
button.
3. Press the or buttons to select Auto run, and then press the
button.
4. Press the or buttons to select a specified mode you like:
• Photo: The unit will start a slideshow when you switch it on.
• Main menu: The unit will display the main menu when you switch it on.
5. Press the
button to confirm.
6. Press and hold the
button to exit.