Logic LIFE 20 User Manual - 2. Charging
Plug in the larger side of the USB cable to a USB
power source.
Connect the 4 pin magnetic connector to the back of
your LOGIC LIFE 20.
Make sure the 4 pin connectors are making contact
with the charging terminal on your LOGIC LIFE 20.
An indicator bar will light up on the watch showing you
the charging progress. Once fully charged the
indicator bar will be filled completely.
2. CHARGING
2.1
2.2
2.3
2.4
For the watch to be completely charged it takes about 2-3 hours.
When your watch gets a low battery, an indicator will alert you.
Charge your
LOGIC LIFE 20
for no less than 2 hours before using it for
the fist time. For a safe charging we recommend placing your watch
in a straight and horizontal surface.
To install the expandable memory card Use the screwdriver
(Included) to detach the back cover of the watch. Do not remove the
battery. Carefully insert the memory card, put on the back cover of
the watch and secure the screws tightly.
Information
Information
MicroSD
MICRO SD LOCATION
4