M-Audio AV 30 User Manual - page 5
5
Appendices
Appendix A - Technical Specifications
Type:
Two-way desktop reference speaker
Low-frequency
driver:
3" Diameter, polypropylene-coated, magnetically shielded with high-
temperature voice coil
High-frequency
driver:
1" Diameter, magnetically shielded silk cone tweeter
Frequency
response:
90 Hz – 20 kHz
Crossover
frequency:
3.3 kHz
RMS SPL:
101.5 dB @ 1 meter
Signal-to-noise
ratio:
> 90 dB (typical, A-weighted)
Input
connectors:
Left and right RCA line input and 1/8" aux input
Polarity:
Positive signal at "+" input produces outward low-frequency cone
displacement
Dynamic power: 10 Watts continuous, per channel into 4 Ω
Input
impedance:
10 k Ω unbalanced, 20 k Ω balanced
Input sensitivity:
100 mV pink noise input produces 90 dBA output SPL at 1 meter with
volume control at maximum
Protection:
RF interference, output current limiting, over temperature, turn on/off
transient, subsonic filter
Indicator:
Blue power LED ring around volume knob on front panel
Power
requirements:
100-120V/~50/60 Hz, 220-240V/~50/60 Hz
Cabinet: Vinyl-laminated
MDF
Dimensions:
7.9" (H) x 5.3" (W) x 6.3" (D); 20 cm (H) x 13.4 cm (W) x 16 cm (D)
Weight:
11.7 lbs. (5.3 kg)
Specifications subject to change without notice