M-Audio Digital Recording Interface Delta 44 Quick Start Manual

Other manuals for Digital Recording Interface Delta 44: Instruction Manual, Quick Start Manual

Manual is about: Digital Recording Interface

Page of 10

Download

Print this page

Bookmark us

Delta 44 Quick Start Guide

The M-Audio Delta 44 is a high grade professional sound card. When setup properly for

use with the SDR-1000, the results speak for themselves. Unbelievably high dynamic

range and crystal clear audio with this card when combined with the versatile SDR-1000

results in an ear pleasing experience that is out of this world.

This page is designed to help you setup your new Delta 44 sound card for use with the

SDR-1000. Below you will find a step-by-step guide (7 steps) along with tips for getting the

fastest support. If you have questions that are not addressed in this guide, the

[Flexradio]

Email Reflector

and the

Flex-Radio-Friends Teamspeak Server

are available for fast,

friendly support.

CAUTION:

It is extremely important to use the settings in the Delta Control Panel as

described below in order not to damage the SDR-1000 hardware due to overdriving the

audio. Make sure the output is set to -10dBv as shown in the screenshots below.

The OEM version of the Delta 44 that FlexRadio ships comes with three components: A

PCI card, the "breakout" box, and a cable to connect the two. We optionally ship the four

sets of cables necessary to connect the sound card to the SDR-1000 (1/8" stereo to dual

1/4" balanced).

PCI Card

Page 1 of 10

Products

2/22/2006

file://\\Server\flexradio\Website\WWW\delta44\delta44.htm

1 2 3 4 5 6 7 Next › »

Summary of Digital Recording Interface Delta 44

Page 1
Delta 44 quick start guide the m-audio delta 44 is a high grade professional sound card. When setup properly for use with the sdr-1000, the results speak for themselves. Unbelievably high dynamic range and crystal clear audio with this card when combined with the versatile sdr-1000 results in an ear...
Page 2
Step 1: install the pci card while a complete discussion of installing pci cards is outside the scope of this quick start guide, there are many resources available on the web just using a google search. For more specific help, use the support methods mentioned above. Step 2: connect the breakout box...
Page 3
Note that the microphone can be connected either through the sdr-1000 enclosure (mic to 4-pin connector on the front and the 1/8" stereo connector in the back going to the sound card mic in) as shown -or- it can be wired straight to the delta 44 input 3/4. A 1/8" stereo coupler will be necessary to ...
Page 4
Enclosure. For digital mode support see the following link for a modified diagram: digital mode diagram. If using the digital setup, care should be taken to setup the second sound card mixer correctly. Make sure that the line in mute on the playback mixer is muted. Here is a functional description o...
Page 5
Complete. Step 5: setup the delta 44 control panel once the driver has been installed, the delta 44 control panel will show up in the taskbar (lower right hand side of the screen). Click on the icon (shown below) to open the control panel and use the following screenshots to setup the controls. M-au...
Page 6
Delta 44 control panel - monitor mixer tab delta 44 control panel - patchbay / router tab page 6 of 10 products 2/22/2006 file://\\server\flexradio\website\www\delta44\delta44.Htm.
Page 7
Step 6: setup the powersdr software now that the delta 44 sound card is completely setup, it is time to setup the powersdr software to use it. Note that the delta 44 is supported only in versions beta 1.3.2 and later. Later versions may have these controls in different locations. Click the setup men...
Page 8
Step 7: calibrate the microphone input open the setup form and click on the transmit tab. Keep this form open while returning to the front panel. Select alc on the tx meter in the upper right corner. Make sure the compressor (comp) is turned off, and click the mox button to begin transmitting. Speak...
Page 9
This concludes the delta 44 quick start guide. At this point you should be able to receive and transmit with the delta 44. If you are still having problems, please refer to the support links mentioned at the top of this guide. Powersdr setup form - transmit tab powersdr - alc page 9 of 10 products 2...
Page 10
© flexradio systems 2005 updated 02/22/06 page 10 of 10 products 2/22/2006 file://\\server\flexradio\website\www\delta44\delta44.Htm.