M-Audio DJ Equipment Quick Start Manual - page 4

|

     3

Torq Xponent Quick Start Guide

日本語

Italiano 

Español 

Deutsch

Français

English

7.   Windows will identify Xponent and will ask if you want to search the 

Internet for a driver.  Select “No, not this time” and press “Next” 

2

.

8.   Windows will display a “Found New Hardware” Wizard.

9.   Choose “Install software automatically” and click “Next.”  

3

10.   Once the Wizard has completed, click “Finish.”

11.   Once the installation is complete, you will see a message pop up stating, 

“Your new hardware is installed and ready to use.”

Windows may repeat sections 7 through 10 of the installation 

process.  This behavior is normal.

IMPORTANT:  Be careful not to touch Xponent’s controls when the unit is 

powering on.  Xponent automatically calibrates itself when powering up and 

touching any of its controls during startup may cause the controller to work 

in unexpected ways.  The Progress Meters on each deck indicate the status 

of the calibration; once all of the Progress Meter LEDs are illuminated, the 

remaining buttons on the unit will become lit and Xponent is ready to use.

2

3