M-Audio MidAir User Manual - Minimum System Requirements
MidAir User Guide
|
5
Installation for Advanced Windows XP Users
5
T
he MidAir receiver is class compliant. This means that on Windows XP and Mac OS X computers, you can simply connect
the receiver to the computer with a USB cable. The operating system already has the drivers required to communicate
with the receiver.
However, advanced Windows XP users who intend to use MidAir with more than one application at the same time or
simultaneously use other class-compliant USB devices with audio capabilities should install the special M-Audio drivers for
optimum performance.
Installation instructions can be found in the printed Quick Start Guide.
Minimum System Requirements
6
When used with a host computer, a USB 1.1 or USB 2.0 port is required.
Windows*
Mac OS*
Pentium 3 600 MHz
Macintosh G3** 600/G4** 667 MHz
256 MB RAM
OS X 10.3.9 with 256 MB RAM
DirectX 9.0c or higher
OS X 10.4.5 or greater with 512 MB RAM
Windows XP (SP2) or higher
(Mac OS 9 or earlier not supported)
(Windows 98, Me, NT or 2000 not supported)
* Please check the minimum system requirements of your DAW software as they may be higher.
** Native USB port required; G3/G4 accelerator cards are not supported.