M-Audio Oxygen 61 Quick Start Manual - page 4
4
Features
Front Panel
1.
LED Screen: The Oxygen 61 features a 3-digit LED display providing visual information regarding current
operation, programing and controller status.
2.
Function Buttons: The Oxygen 61 features function buttons for programming, access to settings and
advanced features.
3.
Sliders: Thesesend different types of standard MIDI CC messages or advanced MIDI messages based on the
parameter they are assigned to or the active preset.
4.
Control Knobs: These knobssend different types of standard MIDI CC messages or advanced MIDI
messages based on the parameter they are assigned to or the active preset.
5.
Pads: Press these velocity-sensitive pads to send Note On/Off and velocity data when performing.To change
the pad octave assignment, hold down the Shift and the + or - octave button. These changes affect all eight
pads globally. To transpose from the default pad assignments, hold down the Shift and Select button and press
the + or - octave buttons. To reset the pads to the default factory assignments, hold down the Shift and both
octave buttons.
6.
Transport Buttons: Sends standard MIDI CC, MIDI note, MMC (MIDI Machine Control) or other advanced
MIDI messages based on the parameter they are assigned to or the active preset.
7.
Velocity-Sensitive Keyboard: The velocity-sensitive keyboard is not only the primary method of sending Note
On/Off and velocity data when performing, it is also used to access extended programing functions listed along
its upper edge.
8.
Octave Buttons: The Octave buttons are used to shift the keyboard’s octave range up or down in one octave
increments, extending the octave range of the pads or keys. To learn more about additional features, please
see the full User Guide available at m-audio.com/oxygen61.
9.
Pitch Bend Wheel: The assignable pitch bend wheel is primarily used to bend the notes played on the
keyboard up or down.You can assign other functions to the Pitch Bend wheel in Edit Mode. To learn more
about this, please see the full User Guide, available at m-audio.com/oxygen61.
10.
Modulation Wheel: This wheel is used to add expression to performances by changing the intensity of certain
effects. Rolling the Modulation Wheel upward will increase the modulation effect, while rolling downward will
reduce the effect. You can assign other functions to the Modulation Wheel in Edit Mode. To learn more about
this, please see the full User Guide, available at m-audio.com/oxygen61.
Rear Panel
1.
USB Port: The USB 2.0 port (backward-compatible with USB
1.1) delivers power to the keyboard and transmits MIDI data
when connected to a computer.
2.
Sustain Pedal Input: This input accepts a momentary-contact
foot pedal (not included). When pressed, this pedal will sustain
thesound you are playing without having to keep your fingers
pressing down on the keys.
3.
On/Off Switch: Use this switch to power the device on or off. When this switch is set to the “on” position,
Oxygen 61 is powered throughthe USB connection to your computer.
4.
Kensington Lock Connector: This connector is compatible with standard laptop-style Kensingtonsecurity
cables for theft protection.
GLOBAL
SHIFT
OCTAVE
PITCH
C31
MOD
C32
EDIT
AUTO
C1
C18
C2
C19
C3
C20
C4
C21
C5
C22
C6
C23
C7
C24
C8
C25
C9
C26
C27
C28
C29
C30
AUTO
POWER
PGM
PRESETS
1
2
3
4
5
6
7
8
CANCEL
CTRL
SEL
CTRL
ASGN
CHAN
ASGN
GLOBAL
CHAN
DATA 1
DATA 2
DATA 3
PROG
BANK
LSB
BANK
MSB
VEL
CURVE
DRAW
BAR
MEM
DUMP
DEV
ID
STORE
0
1
2
3
4
5
6
7
8
9
ENTER
PANIC
SELECT
C10
C11
C12
C13
C14
C15
C16
C17
1 2 3
4
1
2
3
5
6
7
4
8
9 10
10
1 2 3
4
1
2
3
4
5
6
7
8
9
10