M-Audio Revolution 7.1 Quick Start Manual

III. Mac OS X Installation

Step 1 - Install the Card

Shut your computer down and insert the Revolution PCI card into an

empty PCI slot. For specific instructions on how to do this, please refer to

the Revolution Manual, Hardware Setup section.

Step 2 - Open the M-Audio Revolution CD

Insert the Revolution CD ROM into your Macintosh CD ROM drive and

double-click on the Revolution CD icon that will appear on your desktop.

Step 3 - Open the Mac OS X folder

In the Revolution CD ROM window, double click on the Mac OS X folder.

Step 4 - Run the Installer

Double click on the M-Audio Revolution Software.dmg file. A virtual disk

called M-Audio Revolution Software will open on your desktop. Double-

click on the M-Audio Revolution Software.mpkg and follow the instructions

on each screen.

Step 5 - Connect the Speakers

A typical system using the Revolution has between two and eight speakers.

Connect the Left, Right, Center, Subwoofer, Left Surround, and Right

Surround speakers to the jacks on the Revolution. You can connect an

additional two speakers for Left Center and Right Center Surround if you

have them.

Step 6 - Test your Installation

Play a DVD or other surround movie to enjoy your new surround system.

Open the Revolution control panel to activate Circle Surround II™ and

adjust the speaker settings.

Still need more info? Refer to the manual now, as it will

discuss the setup process in a lot greater detail.

For information on other M-Audio products, vist our website at

www.m-audio.com

Quick Start Guide

for the

Revolution 7.1

High-Definition Surround Sound Card

This guide is intended to help get you started quickly.

In order to achieve optimal usage of your new

soundcard we recommend that you carefully study the

enclosed product manual, either after completing the

process described in this guide or, if generally

unfamiliar with computer hardware installation.

™

01-07-03