M-Audio SBX10 User Manual - page 14
14
Studiophile BX10s Deluxe Subwoofer
Appendix A - Technical Specifications
* Above specifications subject to change without notice
Type
Bass-reflex active powered subwoofer
Woofer Driver
10-inch composite (treated paper/fiberglass) cone with high-temperature
voice coil and damped rubber surround
Frequency Response
20Hz - 200Hz
Crossover
HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order
alignment
Input Sensitivity
85mV pink noise input produces 100dBA output SPL at one meter with
volume control at maximum
Amplifier
240W average power into 4 ohms, discrete transistor design
S/N Ratio
86dB (A-weighted)
THD at rated power
0.019%
Inputs
Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced
inputs, two RCA unbalanced inputs
Outputs
Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/
unbalanced outputs for satellites
Controls
Volume/Gain control, phase inverse switch, variable crossover control,
subwoofer bypass footswitch jack
Input Impedance
20k ohms balanced, 10k ohms unbalanced
Maximum input level
+20dBu
Protection
Over temperature, turn-on/off transient, subsonic filter, external mains
fuse, DC protection, over current protection
Indicator
Power On (blue) or Bypass (red)
Power Requirements
Dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/
60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC
cable
Cabinet
Vinyl-laminated MDF
Dimensions
15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8
cm (d)
Shipping Weight
54.6 lbs, 24.75 kg