Quickstart guide english ( 3 – 9 ) guía de inicio rápido español ( 10 – 16 ) guide d'utilisation simplifié français ( 17 – 23 ) guida rapida italiano ( 24 – 30 ) schnellstart-anleitung deutsch ( 31 – 37 ) appendix english ( 38 ).
3 quickstart guide (english) introduction box contents trigger finger pro usb cable arsenal software (download) hex key air drums software (download) quickstart guide hybrid 3.0 software (download) user guide (download) software download card safety & warranty manual important: visit m-audio.Com/tfp...
4 3. Set up trigger finger pro with your software to select trigger finger pro as a controller for your digital audio workstation (daw): 1. Connect trigger finger pro to your computer using a standard usb cable. (if you are connecting trigger finger pro to a usb hub, make sure it is a powered hub.) ...
5 basic operation this chapter briefly explains trigger finger pro's most basic features to help you get started quickly. To learn more and get the most use out of your trigger finger pro, though, we recommend downloading the full user guide from m-audio.Com/tfp. Navigation trigger finger pro's disp...
6 control mode lets you adjust various parameters affecting the knobs, faders, and assignable buttons. Press the control button (ctrl) to enter or exit this mode. When in control mode, the button will light up and knobs, faders, buttons, or advanced will appear in the display, depending on what page...
7 features overview 2 3 4 5 7 7 7 7 6 8 9 10 11 9 10 11 9 10 11 9 10 12 13 14 15 16 17 18 19 20 21 23 27 30 31 28 29 24 25 26 21 21 21 22 22 22 22 11 1 1. Power input: if you do not want to use a computer in your setup (i.E., if you are using trigger finger pro to control an external midi module), c...
8 8. Save: press this button to save the current preset, sequence, preferences, or all three. Press and hold this button for 2-3 seconds to save all of trigger finger pro's settings and current state. 9. Knobs: use these 360º knobs to send midi cc messages to your software or external midi device. A...
9 17. Play: press this button to start playback of trigger finger pro's sequencer and your daw. 18. Stop: press this button to stop playback of trigger finger pro's sequencer and your daw. 19. Record (rec): press this button to record-arm trigger finger pro's sequencer. 20. Loop: press this button t...
38 appendix (english) technical specifications display monochromatic lcd, 68x4 characters pads 16 pads (in a 4x4 grid), velocity- and pressure-sensitive, rgb-backlit with assignable colors; 4 banks assignable knobs 4 360º encoders; 4 banks assignable faders 4 60mm faders; 4 banks assignable buttons ...
M-audio.Com manual version 1.0
