M-Audio USB User Manual

Manual is about: M-Audio USER GUIDE USB

Summary of USB

  • Page 1

    Contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 what’s in the box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 transit usb specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 2

    E n g l i s h technical features: • supports the following sampling frequencies (in hz): 8000, 9600, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000, 88200*, 96000 • supports 16-bit and 24-bit linear pcm i/o, and 16-bit ac-3 output over s/pdif toslink • supports the following audio protocols:...

  • Page 3

    3. Analog line-output jack – this 1/8” mini-jack accepts a standard stereo plug, such as those used for connection with portable audio devices and powered computer speakers. If you need to connect with a home stereo system, you may obtain a cable or adapter with 1/8” stereo plug on one end and two m...

  • Page 4

    Default settings for cd and dvd playback selected. Unless you’re certain your hardware is incompatible with these settings, it is recommended that you leave them selected . 6. You will be prompted to restart your computer. Click finish to restart. 7. On rebooting, the m-audio transit usb control pan...

  • Page 5

    3. The installer will begin to copy the transit usb files to your computer’s hard drive. 4. The digital signature window will appear, warning you that the driver software does not contain a microsoft digital signature. Click the yes button to continue the installation. 11 e n g l i s h again see the...

  • Page 6

    9. The new hardware wizard will write the remaining files to your system. When the installation is complete, click finish. 10. After the installation is complete, you may double-click on the m-audio transit usb control panel icon to open the transit usb control panel. See the section “transit usb co...

  • Page 7

    5. After the driver files have been installed, you will be prompted to restart your computer. Click finish and your computer will reboot. 6. On rebooting, the m-audio transit usb control panel icon will appear in the system tray. Connect the transit usb to your computer’s usb port. 7. The new hardwa...

  • Page 8

    Wish to install transit usb. Click next to continue. 3. The installer will begin to copy the transit usb files to your computer’s hard drive. 4. Once the driver files have successfully been installed, the cd performance enhancements screen will appear. By default, the performance enhancement setting...

  • Page 9

    8. Windows will ask “ what do you want to install?” select the default “the updated driver (recommended)” and click “next”. 9. In some cases,windows may ask you to insert your windows cd-rom. If so, insert the cd and, using the windows explorer menu, navigate to your cd-rom drive. Select win98se to ...

  • Page 10

    5. For first-time installations,the default easy install is the desired selection..Click install to continue. 6. You will be prompted to restart your computer. Click continue. 7. When your computer has restarted, connect the transit usb to your computer’s usb port. 8. Under control panels, select so...

  • Page 11

    8 if prompted to do so, click "upgrade" to continue. 9. When prompted, click "continue installation." 10. When prompted, click "restart" to finish the installation. 11. After the computer has restarted, now plug the transit into your computer’s usb port. 12. Go to "system preferences" in the apple m...

  • Page 12

    Operating mode in this drop down menu you can select how the transit usb sends and/or receives audio.The following options are available: • 2-in/2-out, 16-bit, 8000 – 48000 hz • 2-in/2-out, 24-bit, 8000 – 48000 hz • 2-in/0-out, 24-bit, 88200 – 96000 hz • 0-in/2-out, 24-bit, 88200 – 96000 hz • dolby ...

  • Page 13

    Asio drivers: transit usb also supports steinberg’s asio protocol under os 9, used in applications such as cubase, reason, live, logic and digital performer 3. In order to use transit usb’s asio drivers with your daw application, you will need to copy the drivers into your program’s asio folder. 1. ...

  • Page 14

    Warranty information m-audio warrants this product, under normal use, to be free of defects in materials and workmanship for a period of one (1) year from date of purchase, so long as: the product is owned by the original purchaser, with proof of purchase from an authorized m-audio dealer and, the p...

  • Page 15

    30