M.E.Y. Equipment 26TCVM Owner's Manual

Summary of 26TCVM

  • Page 1

    Owner’s manual 26” twin clutch vertimower model no. 26tcvm.

  • Page 2

    M.E.Y. Equipment – 26” twin clutch vertimower 2 introduction the technical data and service recommendations referred to in this maintenance manual relates to m. E. Y. Equipment vertimowers. Although most adjustments & repairs can be carried out by the operator - should difficulty be experienced, it ...

  • Page 3

    M.E.Y. Equipment – 26” twin clutch vertimower 3 safety instructions please read before using vertimower. • never vertimow while barefoot or wearing open sandals or thongs. Wear long trousers and strong protective shoes. • know your controls. Learn how to stop the engine quickly in any emergency. • m...

  • Page 4

    M.E.Y. Equipment – 26” twin clutch vertimower 4 setting up the vertimower • to obtain an even depth of cut, setting up the vertimower correctly is important and the following procedure is recommended. • turn off petrol. • turn engine to top dead centre (tdc). • lay back mower on 20 ltr drum or catch...

  • Page 5

    M.E.Y. Equipment – 26” twin clutch vertimower 5 mower care tips • when cleaning the mower, avoid using pressure hoses of air or water which may force grit into the bearings, oiled clutch and the engine. • the twin clutch enables the cutter reel to be stationary when moving over hard paved areas and ...

  • Page 6

    M.E.Y. Equipment – 26” twin clutch vertimower 6 cutting reel vertimowers can be fitted with a choice of blades:- • 2 tooth crinolin spring steel blades are normally fitted as standard. They can be reversed by removing the reel, removing the bearing housings, removing the nyloc nut and all the blades...

  • Page 7

    M.E.Y. Equipment – 26” twin clutch vertimower 7 back roller the back rollers are fabricated from thick line pipe, rolled on both ends to prevent scuffing and mounted on discs secured to a main drive shaft rotating on sealed ball bearings with machined steel bearing housings. The drive is through a 3...

  • Page 8

    M.E.Y. Equipment – 26” twin clutch vertimower 8 maintenance notes:- (servicing, oil changes, bearing replacements etc.) 200 collier road bayswater wa 6053 tel 08 9370 1110 fax 08 9370 2566 web: www.Mey.Com.Au email: sales@mey.Com.Au.