M.E.Y. Equipment 991101 Parts Manual

200 Collier Rd, Bayswater, Western Australia 6053.  Tel 08 9370 1110 Fax 08 9370 2566 

www.mey.com.au

sales@mey.com.au

28” Twin Clutch Mower 

Early model prior to 991101   Current 

model 

991101 

onwards 

Note the distinctive different style of side handles 

PICKING THE CORRECT PARTS: 

•  Serial number is located on the aluminium manufacturer’s tag 

but is also stamped into the front steel cross rail on the chaincase 

side.  The first two numbers are the year and second two numbers 

are the month of manufacture. E.g. Serial No 991101 was the first 

mower made in November 1999. 

•  Single clutch models can use the same parts drawing. 

•  Cylinder chain lengths for models prior to 991101 varied over the 

life of the cylinder. Order a long cylinder chain and a half link so 

that the length can be adjusted to suit your mower. 

•  Clutch and Drive shafts should be measured and the overall 

length checked when ordering by part number. 

•  Female clutch cones are normally 25mm but at times 1” bore was 

used due to engine shortages.  Check bore before ordering.