M-Edge StealthPro Keyboard Folio Instruction Manual - page 3
PAIRINg INSTRUCTIONS
(PAIR TO IPAd AS exAMPLe)
1. Turn on the power toggle switch. The [Power] and [ ] indicator light will be on
for 5 seconds and then go off.
2. Press on the [Connect] button, the indicator light [ ] will blink. The keyboard
is now ready to connect to your device.
3. Turn on and unlock iPad. Click on the iPad [Settings] icon.
4. On the setting menu, select item [General] to access [Bluetooth] turn on the
connection. iPad will automatically search for a Bluetooth-enabled device.
5. Once the Bluetooth 3.0 keyboard has been identified, click on Bluetooth 3.0
keyboard to connect to your device.
6. Enter the random four digit password code as displayed on the screen on the
keyboard and hit enter.
7. Once the Bluetooth keyboard has successfully connected to your device, the
indicator light [status] will be off.
OPeRATINg SySTeM INSTRUCTIONS
1. The default mode is for the iOS system. If you need to use it for android or
Windows, please shift it by pressing Fn key and W key for Android (or E key for
Windows) together before you start to type.
2. Please make sure your Android or Windows device is equipped with a
Bluetooth HID profile before pairing.
ChARgINg INSTRUCTIONS
When the battery power is low, the indicator light [power] will start blinking. This
means that it is time to recharge the keyboard.
1. Connect the micro end of the USB power cable to the micro USB port on
the keyboard.
2. Connect the other end of the cable to a wall plug power adapter or computer
USB interface.
3. The indicator light [charge] will stay on red while the keyboard is charging.
Once it is fully charged, the power indicator light will shut off.
The POweR SAVINg MOde
The keyboard will enter sleep mode after being idle for 15 minutes. To activate it from
sleep mode, press any key and wait 3 seconds.
TROUbLeShOOTINg
Unable to connect
1. Check whether the power switch is on or not.
2. Verify that the keyboard is within the operating distance (the available
distance is 10 meters).
3. Make sure the battery is not depleted.
4. Ensure your device’s Bluetooth function is turned on.
5. Confirm the Bluetooth keyboard has been paired with your device.
Unable to Charge Keyboard
1. Identify if the USB power cable is connected properly to the keyboard and the
power source.
2. Check of the wall charger has plugged into power outlet.
USAge TIPS
1. Do not place any heavy objects on top of the key board.
2. Do not knock or dismantle the keyboard.