1. DL manuals
  2. M K Martin Enterprise
  3. Snow Blower
  4. 97D
  5. Owner's Manual

M K Martin Enterprise 97D Owner's Manual

Summary of 97D

  • Page 1

    Owners manual parts list for 97d - 108 double auger) snowblower m k martin enterprise 3950 steffler rd elmira ont n3b 2z3 (519) tel 664-2752 / fax 664-3695 e-mail: sales@mkmartin.Ca snowblowers rev:12-1.

  • Page 2

    97d - 108 meteor snowblower table of contents 1. Registration and warranty 2. Safety introduction 3. Safety 4. Decal location 5. Assembly information 6. Operation 7. Main parts 8. Chute rotator 9. Gearbox parts 10. Comer t 80 540 rpm pto 11. Comer t 90 540 rpm pto 12. 1000 rpm reduction gearbox 13. ...

  • Page 3

    Welcome to our lineup of meteor snowblowers m k martin enterprise inc has been building the meteor snowblowers since 1985. With proper care and maintenance the meteor snowblower will give you years of reliable service. The most common damage to a snowblower is from foreign objects. Please ensure tha...

  • Page 4

    Safety take note! This safety symbol is found throughout this manual to call your attention to instructions involving yourself and others working around the machine. • failure to follow these instructions can result in injury or death! This symbol means --attention! --become alert! --your safety is ...

  • Page 5

    Safety – it’s in your interest . Safety guidelines. Safety of the operator is one of our main concerns, however it is up to the operator to practice caution. To avoid personal injury, study the following precautions and insist that those working with you to follow them. The meteor snowblower has onl...

  • Page 6

    97d – 108 meteor decal location part # 806 part # 404 part # 104 part # canada2x2 “a” decal is located on both sides “b” decal is located on the cross shaft shield “c” decal is located on the pto shield “d” decal is located on the front of fan “e” decal is manufacture’s brand and is located on the m...

  • Page 7

    75-108 meteor snowblower assembly information 1. 2 set hood bearing assembly 2. 4 pc 5/8 wavewasher (thin) 3. 2 pc 5/8 x 2 unf bolts 4. 2 pc 5/8 unf locknut 5. 1 pc 2 hole chute clamp 6. 1 assembly instructions upon receiving the meteor snowblower the blowers are shipped in a packaged state these bl...

  • Page 8

    108 hydraulic rotator the hydraulic chute rotator uses a hydraulic motor, controlled by the tractor hydraulics to rotate the chute. The kit includes a safety shield that also keeps the snow and ice form building up on top of the gears. The motor kit is bolted to the base with 2, 1/2-20 unf bolts. Th...

  • Page 9

    97d - 108 meteor® snowblower this blower is ideal for tractors 100 - 120 hp cat #2 3ph. Attaching the meteor® blower for the first time. Set the blower on a level surface and back the tractor up to it. Place the lower 3ph arms of the tractor between the lower hitch plates on the blower and insert th...

  • Page 10

    Operating the meteor® snowblower this blower is on the back of the tractor facing toward the rear. While blowing snow the tractor has to be backed into the snow. Stay in the seat of the tractor all the time that the blower is running. Make sure the area is clear of people while blowing snow. Do not ...

  • Page 11

    Sign-off form m. K. Martin enterprise inc. Follows the general safety standards specified by the american society of agricultural engineers (asae) and the occupational health and safety administration (osha). Anyone who will be operating and/or maintaining the cutter must read and clearly understand...

  • Page 12

    97d-108 parts 11.

  • Page 13

    97d-108 meteor snowblower model 97d model 108 item no description part no req part no req 1 bolt 1/2x11/2 c/w lw, n ol 16 ol 16 2 main body 519-21684 1 519-21587 1 3 option -bent pin 1/2" ol 2 ol 2 4 option- skid shoe 519-21592 2 519-21592 2 5 option - hair pin 1/8 ol 2 ol 2 6 hitch pin 519-21838 2 ...

  • Page 14

    97d-108 meteor snowblower model 97d model 108 item no description part no req part no req 45 rubber latch 519-099-460 1 519-099-460 1 pin 519-099-012 1 519-099-012 1 cotter pin 1/16x1/2 ol 1 ol 1 46 fan 519-108115208 1 519-108115208 1 47 fan key 519-1081162 1 519-1081162 1 48 bolt 5/8x1 1/2 c/w lw o...

  • Page 15

    97d-108 hydraulic chute rotator 2011 hydraulic rotator item no description part no req 1 motor bracket 519-511703 1 2 motor 519-511704 1 3 o ring 3/32x.755id 519- 2 4 crossover relief valve 519-511705 1 5 socket head cap screw 5/16x1 1/2 ol 4 6 small gear 519-511706 1 7 right shield 519-108170709 1 ...

  • Page 16

    T279-a gearbox item # description part # req’d 1 casing t4 519-0.279.0300.00 1 2 snap ring 519-8.5.1.00533 1 3 bolt m10 x 32 519-8.1.1.00501 16 4 shim 70.3 519-0.712.7500.00 1 5 parallel key 519-8.4.1.00978 2 6 shaft 519-0.279.3010.00 1 7 oil seal 50x72x8 519-8.7.1.01097 1 8 bearing 30210 519-8.0.9....

  • Page 17

    Comer t80 540 rpm pto note: this pto has 1 3/8 - 6 tooth yoke on one end and 1 3/4 - 20 tooth yoke on other end cross bearing is 35mm or approx 1 3/8" dia 16.

  • Page 18

    Comer t80 540 rpm pto item # description part# req 1 complete collar yoke 1 3/8 - 6 t 141.028.423 1 2 cross journal set 35x106.5 180.018.130 2 5 outer yoke 151.018.133 1 11 roll pin for outer yoke 190.000.243 1 12 bushing with grease fitting 180.018.210 1 14 complete outer tube 152.198.174.0720 1 15...

  • Page 19

    Comer t90 540 rpm pto note: this pto has 1 3/8 - 6 tooth yoke on one end and 1 3/4 - 20 tooth yoke on other end cross bearing is 41mm or approx 1 5/8" dia 18.

  • Page 20

    Comer t90 540 rpm pto item # description part# req 1 complete collar yoke 1 3/8 - 6t 141.025.319 1 2 cross journal set 41x108 180.019.130 2 5 outer yoke 151.019.127 1 11 roll pin for outer yoke 190.000.243 1 12 bushing with grease fitting 180.018.210 1 14 complete outer tube 152.198.520.0720 1 15 in...

  • Page 21

    1000 rpm option gearbox item no description part no req 1 casing with plug 519-1084050 1 2 bearing 519-1084051 2 3 seal cover 519-1084052 1 4 sprocket 80-3a14 519-1084053 1 5 chain 80-3 x36 519-1084054 1 6 bearing 519-1084055 2 7 input cover with hole 519-1084056 1 8 sprocket 80-3a14 519-1084057 1 9...

  • Page 22

    Comer t80 1000 rpm pto note: this pto has 1 3/8 21 tooth yoke on one end and 1 3/4 - 20 tooth yoke on other end cross bearing is 35mm or approx 1 3/8" dia 21.

  • Page 23

    Comer t80 1000 rpm pto item # description part# req 1 complete collar yoke 1 3/8"-21t 141.028.426 1 2 cross journal set 108.018.130 2 5 outer yoke 151.018.133 1 11 roll pin for outer tube 190.000.243 1 12 bush with grease fitting 180.018.210 1 14 complete outer tube 152.198.171.0720 1 15 inner tube ...

  • Page 24

    Pto installation instructions for snowblower 23.

  • Page 25: Danger: Too Big Tractors

    Pto installation instructions for snowblower for better pto shaft and gearbox operation a proper initial installation will give you years of satisfactory service on your equipment. Please read carefully, following instructions which have been specially made to help you and make you satisfied of your...

  • Page 26

    Previous examples clearly demonstrate that universal joint angle is directly related with life of pto. In order to reduce angle, it is necessary to increase the angle between snowblower and tractor. Too large angles at pto joints reasonable angles at pto joints to avoid acceptable if it is impossibl...

  • Page 27

    Shear bolts shear bolts are built to break under shock loads on the fan or auger. However under certain circumstances this security is not adequate. Example: a sudden high impact shock on the fan may, in some cases break the fan shaft without breaking the shear bolt. If the shear bolt breaks, make s...

  • Page 28

    Effective pto drive shaft maintenance 27.

  • Page 29

    Avoidable damage possible causes corrective actions quick-disconnect yoke quick-disconnect pin tight or completely seized quick-disconnect pin damaged (broken or bent) quick-disconnect pin damaged in locking position quick-disconnect pin dirty (insufficient maintenance) quick-disconnect pin defectiv...

  • Page 30

    Avoidable damages possible causes corrective actions cross arms broken extreme torque peak or shock load axial loads too large use appropriate safety device change to a larger pto size shorten pto shaft replace defective cross bearings bearing caps turning in their cross journal overheated bearing c...

  • Page 31

    Avoidable damages possible causes corrective actions excessive wear of shield bearings insufficient lubrication incorrect chain mounting shield interfering with implement follow lubrication instructions mount chain to allow maximum angularity avoid shield contact with machine or tractor replace shie...

  • Page 32

    Bolt torque as used on this equipment bolt torque table shown below gives torque values for the various bolts used. This chart is for non-lubricated threads. Replace with the same strength bolt. Torque specifications. Torque values are identified by their head markings diameter sae 2 sae 5 sae 8 “a”...

  • Page 33

    97d - 108 meteor snowblower maintenance • pto shearbolt – refer to pto assembly • auger shearbolts – 5/16 x 1 1/4” gr #2 • auger drive chain tightener – tighten chain allowing ¼” sag in the bottom span of chain (between drive and driven sprocket). Lubrication • gearbox- check oil level every 50 hour...