M&K Sound IW150 Operation Manuals - page 7
7
B A C K B O X I N - W A L L L O U D S P E A K E R S
Speaker Connection
Use the solid push terminals for easy speaker wiring to amplifier for cables up to 5 mm / AWG 6.
In surround system setup, it is important to wire all speakers correctly for correct phase.
It is therefore recommended to use speaker cable with marked wires for + and – leads for an easy visual check of
the connection.
Amplifier speaker output
Speaker input push terminal
The Choice of Professionals
®
The world’s most eminent musicians, singers, producers, directors and engineers working in hundreds of film,
music, broadcast and postproduction studios worldwide, choose M&K Sound loudspeakers.
Every day they make hundreds of artistic decisions based upon what they hear on their speakers. The trust
they have in M&K Sound allows them to work quickly and effectively as they create the most breathtaking film
soundtracks and music ever recorded.
M&K Sound are used by the world’s finest filmmakers, including:
The Positive (+) lead
from your amplifier or receiver
should be connected
to the Red (+) INPUT terminal.
The negative (-) lead
from your amplifier or receiver
should be connected
to the Black (-) INPUT terminal.
Note! All M&K Sound speakers are designed to be used with M&K’s acclaimed subwoofers.
We recommend to study www.mksound.com for finding the best suitable subwoofer.