Powered subwoofer operation manual miller & kreisel professional 9351 deering avenue chatsworth, ca 91311 usa tel: 818-701-7010 fax: 818-701-0776 www.Mkprofessional.Com mps-5410 mps-5310
1. Safety instructions 1. Read instructions - all safety and operating instructions should be read before this product is operated. 2. Retain instructions - the safety and operating instructions should be retained for future reference. 3. Heed warnings - all warnings on this product and in the opera...
Table of contents 1. Safety instructions................................................................................... 2 2. Introduction.................................................................................................. 4 3. Packing list..............................................
2. Introduction congratulations and thank you for purchasing the mps-5310. Miller & kreisel professional powered subwoofers are designed to provide many years of accurate and problem free operation. We strongly encourage you to read this owner's manual, as there is a great deal of information provid...
4. Quick product overview the mps-5310 is a 350-watt powered subwoofer that is certified for thx pm3 applications with reference level output in rooms up to approximately 3000 cubic feet in volume (multiple subs can be used for larg- er room applications). The mps-5310 features m&k professional’s ex...
As you walk around the room, be sure to pay careful attention to where the spectral response is smoothest and has the greatest low frequency extension. Pay special attention to the corners and along the walls. Remember, because the subwoofer is basically omni-directional, the best spot for the subwo...
A) mono balanced input - 61k ohms balanced input connector - 200mv in produces 90db of output (reference/thx input sensitivity mode). Pin polarity: 1. Ground 2. Plus 3. Minus b) variable low-pass filter - 50hz to 125hz, 36db per octave low-pass filter. This optional adjustment is activated by settin...
7. Response and sensitivity adjustments the mps-5310 features user adjustable response, sensitivity and crossover adjustments in order to allow for easy integration into any monitoring system or acoustical space. Make sure to use the settings that best match your specific components so that double f...
E. M&k speaker system with an lfe-4 bass management controller or some other form of bass management system. 2. If possible, have one person sit at the listening/monitoring position and read the spl meter, while another person adjusts the trim pots. The spl meter should be held at arm’s length at ea...
3. Select cd track #1 and set your spl meter for c weighting and slow response. Have your assistant sit in the listening position, and hold the spl meter at armís length and at ear height, pointed towards the speaker at a slight upward angle and read the spl. Then using a small flat bladed screwdriv...
One might ask, won’t i perceive a difference in imaging if the sound of one channel originates from two sources (subwoofer and satellite)? The answer is actually no. Bass management works by taking advan- tage of the ear’s inability to determine the direction of frequencies below approximately 150hz...
Main channel speakers, in a system that has bass management, can be small and can be placed where large full range speakers can’t. Unlike two-channel stereo, multichannel audio requires that speakers be placed in very specific locations. In video post it means placing speakers close to the sides and...
11. Mps-5310 specification transducer type (x2) • 12” acrylic polymer coated heavy paper cone • acrylic polymer coated foam surround • 1 inch voice coil length • 2 inch voice coil diameter • kapton (voice coil former bonded with high temperature epoxy) • voice coil is asymmetrically hung • under cut...
