M-LOCKS EC1070 EuroLine series Technical Manual

Page of 3

Download

Bookmark us

M-LOCKS BV

Tel: +31 (0)314 376 876

Vlijtstraat 40

ver. 1.1 2010 09 21

Fax: +31 (0)314 376 878

NL-7005 BN Doetinchem

1 of 3

www.m-locks.com

Technical manual

Mounting instructions

EC1070

CHARACTERISTICS

The EuroLine series was specially developed for safes using boltworks where the C/C

measurement between lock and boltwork drive is 100mm . It will also work combined with the

DirectDrive lock EM1620 (EM1520). The ABS* housing of the EuroLine Entry unit combines

an alpha-numeric membrane keypad with a large L-handle (metal) and an integrated battery

compartment. The 8x8 mm square shaft of the handle drives either the lock or a boltwork.

Cable length is approximately 30cm.

*Acrylonitrile butadiene styrene, or ABS, (chemical formula (C8H8· C4H6·C3H3N) is a common thermoplastic used to make

rigid, moulded products.

DIMENSIONS/MOUNTING:

The diameter of the cable hole should be minimum 9mm, maximum 12mm. The spindle hole

should be maximum Ø 12mm. Both holes must be de-burred well to avoid damage.

Page 1
M-locks bv tel: +31 (0)314 376 876 vlijtstraat 40 ver. 1.1 2010 09 21 fax: +31 (0)314 376 878 nl-7005 bn doetinchem 1 of 3 www.M-locks.Com technical manual mounting instructions ec1070 characteristics the euroline series was specially developed for safes using boltworks where the c/c measurement bet...
Page 2
M-locks bv tel: +31 (0)314 376 876 vlijtstraat 40 ver. 1.1 2010 09 21 fax: +31 (0)314 376 878 nl-7005 bn doetinchem 2 of 3 www.M-locks.Com fit the lock/ boltwork according to manufacturer’s instructions. If em1620 (em1520) is fitted remember to position the star washer between lock and mounting surf...
Page 3
M-locks bv tel: +31 (0)314 376 876 vlijtstraat 40 ver. 1.1 2010 09 21 fax: +31 (0)314 376 878 nl-7005 bn doetinchem 3 of 3 www.M-locks.Com if fitted to a em1620 (em1520) the handle will now be held by the star washer fitted under the lock but if it is used to drive a boltwork the handle must now be ...