M-LOCKS EM1620 User Manual

Other manuals for EM1620: Mounting Instructions
Manual is about: Basic line

Summary of EM1620

  • Page 1

    Basic line em1620 em2020 em2520 em3020 em3520 m•locks bv vlijtstraat 40 • 7005 bn doetinchem • the netherlands • www.M-locks.Com user manual v02 en.

  • Page 2

    2 www.M-locks.Com.

  • Page 3: Content Instructions For Use

    3 www.M-locks.Com basic line v02 en content instructions for use 1 important instructions 2 symbols and signals 3 opening the lock 4 opening the lock with time delay 5 changing managercode (with the door open!) 6 adding a new code/user 7 delete second user 8 setting the time delay and opening window...

  • Page 4: 1   §

    4 www.M-locks.Com 1 § important instructions • before using the lock, please read the instructions for use carefully. • the instructions for use only relate to the lock itself and not to how to operate the safe. • ensure that you only program the lock while the safe door is open . • after changing t...

  • Page 5: Symbols and Signals

    5 www.M-locks.Com basic line v02 en ! Caution! • the lock has been designed for use in a temperature range from +10˚c to +50˚c and a non- condensing humidity range from 30% to 80%. • it may only be cleaned with a moist cloth (do not use aggressive cleaning agents). • the lock may only be installed b...

  • Page 6

    6 www.M-locks.Com for example! 1 second 1 second 1 1 1 1 1 1 during the open window, the light flashes and the locks beeps, every second. To open the lock, a valid code has to be entered again during the open window. After entering a right code, a double signal sounds. You can unlock the door. If the...

  • Page 7: Adding A New Code/user

    7 www.M-locks.Com basic line v02 en 6 adding a new code/user 1 press and hold ‘1’ until a double signal sounds. The led will illuminate when performing the following actions: 9 8 7 6 5 4 • enter your personal manager code for example! 9 9 9 9 9 9 • enter the new user code 9 9 9 9 9 9 • enter the new...

  • Page 8: Deleting The Delay Setting

    8 www.M-locks.Com 9 press and hold ‘9’ until a double signal sounds. The led will illuminate when performing the following actions: 9 8 7 6 5 4 • enter the manager code 2 6 0 2 • enter the delay setting and opening window time. Time delay min. 01 - max. 99 minutes. Open window time min. 01 - max. 19...

  • Page 9: Replacing The Battery

    9 www.M-locks.Com basic line v02 en 10 replacing the battery if the lock emits a series of audible tones when opened, the battery is almost exhausted and must be replaced immediately. You may only use 9v alkaline duracell, duracell industrial or energizer alkaline batteries . Battery compartment in ...

  • Page 10

    10 www.M-locks.Com the lock is difficult to move and open this is probably a problem with the lock bar mechanism, inside the safe door, and not a problem of the lock itself. This manual only relates to the lock and not the complete safe. Please contact the manufac- turer of the safe in order to reso...

  • Page 11

    11 www.M-locks.Com basic line v02 en.

  • Page 12: M•locks Bv

    M•locks bv vlijtstraat 40 • 7005 bn doetinchem • the netherlands • www.M-locks.Com.