M.T.H. PREMIER DASH-9 DIESEL ENGINE Operator's Manual - page 9
9
Premier Dash 9 Diesel Engine Operating Instructions
Lock into a Direction:
You can lock your engine into a direction (forward, neutral, or reverse) so
that it will not change directions. To do this, put the engine into the
direction you want (or into neutral to lock it into neutral), run it at a very
slow crawl (as slowly as it will move without halting), and quickly but
firmly tap the Horn button once followed by three quick taps of the Bell
button, allowing approximately ½ second to lapse between each quick
button press.
Two horn blasts will indicate that the engine has made the
change.
The engine will not change direction (including going into
neutral) until you repeat the 1 horn, 3 bells code to return the engine to its
normal condition, even if the engine is kept without power for extended
periods of time.
Reset to Factory Defaults:
To override the settings you currently have assigned to the engine and
reset it to its factory defaults, while in Neutral tap the Whistle button
quickly once, followed by five quick taps of the Bell button, allowing
approximately ½ second to lapse between each quick button press.
Two
horn blasts will indicate that the engine has made the change.
Automatic Sounds:
Certain Proto-Sound 2.0 sound effects automatically play in programmed
conventional mode conditions:
Squealing Brakes play when the engine’s speed is decreased rapidly.
Cab Chatter plays when the engine idles in neutral.
Engine Start-up and Shut-down sounds play when the engine is
initially powered on or is powered off for five seconds or more.