M-tech MT-1350TRX User manual

Summary of MT-1350TRX

  • Page 1

    An face of security professional wireless data tranceiver mt-1350trx before installing and operating this product, please read this manual thoroughly. English www.M-techkorea.Com m-technology co.,ltd. 415-030 room 504, sunil plaza, 822, bukbyeon-dong, kimpo-si, gyeonggi-do, korea tel: +82-31-984-437...

  • Page 2

    Cautions & warnings 1. The following section contains vital information that helps protect the safety of the user and prevent property damage/loss. Please read it carefully for safe and proper use of your product. 2. 3. Please install the product on a completely flat floor. -always check the strengt...

  • Page 3

    4 product components mt-1350trx tranceiver user’ s manual names and functions of each part ■ connector & dip switch layout wireless data tranceiver manual 1. Wireless data receiving indicator(green) 2. Wireless data transmission indicator(red) 3. Power indigator(blue) 4. Connector1, 2 : power & rs-4...

  • Page 4

    Joining connectors frequency setting connector1 and connector2 are connected inside in parallel. For that reason, either connector has rs-485 signal are turned into receiving mode in rf transmission mode, transmission mode in rf receiving the same function. Disassemble the provided connector, and so...

  • Page 5

    8 wireless data tranceiver manual 9 wireless data tranceiver manual 1. Select anemometer or cctv system 2. Select transmission or receiving mode 3. Resetting mode 4. Select existence of temperature/humidity sensor. On 1 on 1 on 4 on 4 on 2 on 2 on 3 on 3 address setting set1 setting on 1 2 3 4 5 6 7...

  • Page 6

    10 wireless data tranceiver manual 11 wireless data tranceiver manual set2 dip switches for communication and protocols are located on the bottom of the mt-1350trx. For more instructions, please refer set2 dip switch settings. Configuring mt-1350trx dip switches(set2) ● select rs-485 baudrate before...

  • Page 7

    Appearance 12 specifications model frequency 2.410 ~ 2.465 ghz 0 c ~ 40 c 5% ~ 95%, non-condensing 106.9 x 50 x 108mm 10% ~ 80%, non-condensing -40 c ~ 60 c 1,200bps ~ 115,200bps ≤ 10mw ≤ 10w 250,000bps 12 channel number of channels supply voltage dimensions (wxdxh) circumstances power consumption t...

  • Page 8

    This equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate...