M2 antenna systems, inc. 4402 n. Selland ave. Fresno, ca 93722 tel: (559) 432-8873 fax: (559) 432-3059 web: www.M2inc.Com ©2015 m2 antenna systems incoporated 0722/11 rev.01 model ......................................... 6m7jhv frequency range ....................... 50.0 to 50.4 mhz *gain ...........
Tools required: phillips screwdriver, 11/32 wrench, socket or spintite, a 7/16" and 1/2" wrench or socket, tape measure. 1. Layout the boom sections as shown on dimension sheet and assemble with 8-32 x 1-3/4" screws, lockwashers and nuts. Tighten the nuts securely. 2. Use the dimension sheet as refe...
8. Install the main feedline, or a pigtail section just to get to the middle of the boom. Tighten the male 'n' connector carefully, and route the cable forward on the boom, securing it with the cable ties provided. 9. Mount the boom to mast plate perpendicular to elements at the physical balance poi...
17. Installation and stacking information a. A mast or crossboom that is mounted to the boom in the element plane must be non conductive (fiberglass, etc). B. To protect your investment in this high performance antenna, always use high quality coax and connectors. Old, corroded, or poor quality mate...
6m7jhv dimension sheet.
Description qty. Boom section #1to #6 1 1/2 x .065 x 60" soe alum. ................ 6 boom section #7 1 1/2 x .065 x 26" plain. Alum. ....................... 1 element half, 3/8 x .049 x see dimension sheet ................. 14 element support rod, 1/4 x 10” ............................................