M2 Antenna Systems 300XP12 Assembly Manual

Summary of 300XP12

  • Page 1

    M2 antenna systems, inc. 4402 n. Selland ave. Fresno, ca 93722 tel: (559) 432-8873 fax: (559) 432-3059 web: www.M2inc.Com ©2015 m2 antenna systems incorporated 9/16/15 rev.00 model ......................................... 300xp12 frequency range ....................... 280 to 320 mhz *gain ...........

  • Page 2: 300Xp12 Assembly Manual

    Tool required for assembly: screwdriver, 11/32 nut driver or wrench, 7/16” and 1/2” socket or end wrenches, measuring tape. 1. Assemble the boom using 8-32 x 1-1/4 screws and locknuts to join sections. (see dimension sheet). 2. Install horizontal & vertical driven element assembly on to boom using 1...

  • Page 3: 300Xp12 Dimension Sheet

    300xp12 dimension sheet 1/4-20 x 3.0 bolt & locking nut.

  • Page 4

    300xp12 boom to mast plate detail boom to mast plate 3”x 4” 125” with 1” craddles bolt, 1/4-20 x 2.0” & 1/4-20 nuts and lockwashers 2” u-bolt & craddles & 5/16-18 nuts and lockwashers.

  • Page 5: 300Xp12 Parts & Hardware

    300xp12 parts & hardware description .............................................................................. Qty boom section # 1 w/stiffner, 1” x .058 x 48” soe ........... 1 boom section # 2, 1” x .058 x 17” ........................................... 1 elements, 5/16” rod x dim sheet ........