M2 Antenna Systems 40M3FS Assembly Manual

Summary of 40M3FS

  • Page 1

    Features the 40m3fs is a full sized 40 meter yagi designed for the various interests and band segments. We provide you the dimensions to optimize the antenna just for your needs. The result is a powerful package of clean mechani- cal design, quality materials, and outstanding performance that will d...

  • Page 2: 40M3Fs Assembly Manual

    Tool required: 7/16”, 1/2 and 9/16” end wrenches or sockets, #2 phillip screwdriver and 11/32 nut driver or equivalent. The following are simplified instructions. You will need this written section to help set the order of assembly and to cover the most im- portant points. We have provided penetrox ...

  • Page 3: 40M3Fs Assembly Manual

    6. Assemble the boom using 3/8-16 x 4” bolts, lock washers and nuts. Install the eyebolts with the 1/8” wire rope attached. Using the correct spacing mark the driven element posi- tion. Mount the 12 x 12 x 3/8” boom to mast plate on the director end loosely using 3- 1/2” saddles. 7. If a temporary 2...

  • Page 4: 40M3Fs Dimension Sheet

    40m3fs dimension sheet.

  • Page 5: 40M3Fs Element Assemblies

    40m3fs element assemblies.

  • Page 6

    Element mounting plate assembly.

  • Page 7

    Generic compression clamp detail.

  • Page 8: 40M3Fs Parts & Hardware

    Description ................................................................................. Qty boom, 3” x schd. 40 x 240” .......................................................... 1 boom 3.0 x .125 x 180” ................................................................. 2 element sec. 2-1/2 x .1...

  • Page 9: 40M3Fs Parts & Hardware

    Shorting bar 1/2 x 1/2 x 5” alum. (m2asb0262) .................... 1 clamp blocks 3/8” (m2amc0261) ............................................... 4 1:1 balun 5kw (fgbl0300) ........................................................... 1 band clamp w/ hole 21/2 –3-3/4” #52 with hole .....................