M2 antenna systems, inc. 4402 n. Selland ave. Fresno, ca 93722 tel: (559) 432-8873 fax: (559) 432-3059 web: www.M2inc.Com ©2015 m2 antenna systems incoporated 05/28/15 rev.03 model ......................................... 432-6wl frequency range ....................... 420 to 440 mhz *gain ...........
Typical tools required: measuring tape, std slot or phillips screwdriver, 11/32, 7/16, and 1/2 spin-tite, end wrenches and / or sockets. 1. Lay out the boom sections and assemble using the dimension sheet as a guide for position and hardware. 2. Lay out the elements by length and position as shown t...
For the opposite side. Continue installing shaft retainers until all elements are locked in place. 6. Mount the driven element feed block to the boom using a single 8-32 screw 1/4" longer than the boom diameter. Orient with feed and balun connectors oriented as shown on the dimension sheet. 7. Threa...
432-6wl dimension sheet.
Description ...................................................... Qty boom section, 1 x .058 x 60 soe .................. 2 boom section, 1 x .058 x 60 str .................. 1 elements, 3/16 rod x dimension sheet ......... 21 feed block, ..................................................... 1 balun...