M2 Antenna Systems 440-18 Assembly Manual

Summary of 440-18

  • Page 1

    M2 antenna systems, inc. 4402 n. Selland ave. Fresno, ca 93722 tel: (559) 432-8873 fax: (559) 432-3059 web: www.M2inc.Com ©2015 m2 antenna systems incorporated 06/09/15 rev.03 model ......................................... 440-18 frequency range ....................... 420 to 453 mhz *gain ...........

  • Page 2: 440-18 Assembly Manual

    1. Start by laying out the boom sections using the dimension sheet as a guide. Use 8-32 x 1-1/4 screws and locknuts to join sections. Sections may be swaged to fit each other or use short internal splice sections. 2. Lay out the elements by length and position as shown the dimension sheet. Start wit...

  • Page 3: 440-18 Assembly Manual

    6. Mount the driven element block to the boom using a single 8-32 x 1-1/4" screw and lockwasher. Orient the block with feed connector facing to center and balun connectors facing to rear. Block orientation may be reversed if you wish feedline to exit from rear of boom. 7. Attach balun and tighten th...

  • Page 4: 440-18 Dimension Sheet

    440-18 dimension sheet.

  • Page 5: 440-18 Parts & Hardware

    Description qty boom section, 1 x .058 x 57” soe ............. 1 boom section, 1 x .058 x 60” soe ............. 1 boom section, 3/4 x .058 x 25-1/2” ............ 1 elements, 3/16 rod x dimension sheet ...... 18 driven element block .............................. 1 balun, rg-6 1/2 wave .................