MA Technology Notebook User Manual - page 25
of
37
Using the Built-in Rotating Camera
The built-in rotating camera can rotate up to 180 degrees, and is equipped with
an internal sensor to automatically switch to the correct orientation. You can
rotate the built-in rotating camera back and forth to use on both sides of the
display panel.
To rotate the built-in rotating camera:
1.
Hold the edge of the built-in rotating camera with your thumb and index
finger.
2.
Use your thumb to push the bottom edge of the built-in rotating camera up.
3.
Gently turn outwards until it locks into the 180 degrees position.
Note
The built-in rotating camera must be returned to its original position for the
display panel to close properly.
22