Summary of AV-COFDM
Page 1
Mac av-cofdm standalone modulator user manual for web interface 201 ref. 4449.
Page 3
4 introduction 4 about this manual 4 product description 5 connection to the web interface 5 ethernet connection 7 general configuration 7 main menu 8 identification 8 system time 9 network 9 password 10 lcd+joystick 10 restart 10 firmware 11 save/restore configuration 12 signal settings 12 inputs 1...
Page 4: Introduction
4 introduction about this manual this manual describes the configuration environment of the mac 201 unit based on a web interface via ethernet connection. The scope of the configuration options is complete: start-up, settings and fault monitoring for the mac 201 unit. The description consists of the...
Page 5
5 connection to the web interface ethernet connection the web interface allows you to fully configure the mac 201 unit through an ethernet con- nection and a web browser. Note to display the graphics provided in the unit configuration program correctly, we recommend installing the web browser mozill...
Page 6
Connection to the web interface/ethernet connection 6 connection to the web interface /ethernet connection 6 note the configuration process must be made in local mode, although later you will be able to access the unit from any pc in the lan. 3) launch the web browser and enter the mac 201 unit's ip...
Page 7
7 general configuration main menu key 1 configuration screens 6 print button 2 work area 7 menu selection area 3 exit button 8 main menu 4 information button 9 submenus 5 language selection j to explore the different menus, select each one in the menu area (position 8 in the above diagram). Dependin...
Page 8
8 general configuration /identification j to exit the interface screen, click on the option exit (position 3 in the above dia- gram). Identification 1) select the general menu and then the configuration submenu. 2) select the identification tab. The identification configuration tab establish- es the...
Page 9
9 general configuration /network 3) to modify the date and time of the unit, click on the option configure date and time in the lower part of the screen. 4) once finished configuring the data you can save it by clicking on save in the lower part of the screen. Network 1) select the general menu and ...
Page 10
General configuration/lcd+joystick 10 general configuration /lcd+joystick 10 j repeat new password : repeat the new password. 3) to activate the new password click on send in the lower left part of the password tab. The new password will be necessary the next time you access the web interface. Lcd+j...
Page 11
11 general configuration /save/restore configuration general configuration /save/restore configuration 11 note the firmware update file must be saved on the pc's hard disc (you can download it at http://www.Ikusi.Com). 3) to load the new firmware click on the start button at the end of the tab. Save...
Page 12
12 signal settings inputs 1) select the settings menu and then the av input submenu. 2) select the input 1 tab. The input 1 tab displays the status of the av ana- logue tv input in input av1 and lets you modify how the audio and video components are dealt with. Information on the status of the av1 i...
Page 13
13 signal settings /service management signal settings /service management 13 3) to store the configuration selected click on the save button in the lower part of the tab. 4) to restore the default values click on the de- fault button in the lower part of the tab. 5) to configure the av2 input, sele...
Page 14
Signal settings/advanced service management 14 signal settings /advanced service management 14 f min. Null : displays the minimum percentage of binary data in the output that does not contain information. F act. Null : displays the current percentage of binary data in the output that does not contai...
Page 15
15 signal settings /output signal settings /output 15 f independent television commission : the descriptor for the uk is inserted. F nordig mode v1 : the descriptor according to the nordig v1 specification is inserted. F nordig mode v2 : the descriptor according to the nordig v2 specification is ins...
Page 16
16 signal settings /output f code rate : configures the redundant code rate by selecting from the values 1/2, 2/3, 3/4, 5/6 and 7/8. F attenuation : configures the attenuation for the radio frequency carrier signal to the output using a sliding bar to vary this value within the range of 0 db to 47 d...
Page 17
17 status information status information 1) select the status menu and then the status information submenu. 2) select the general tab. The general tab in status in- formation shows the input status, the output status and other general unit parameters (alarms, temperature and services). J input 1 and...
Page 18
18 status information /status information 3) select the details tab. The details tab offers a detailed on-screen report as to the general running of the unit. This report consists of four sections: j general: temperature of the unit. J input: alarms and status of the inputs. J ts processing: transpo...
Page 19
19 reports general 1) select the reports menu and then the gen- eral report submenu. The general report provides information on the gen- eral configuration of the unit on the screens of the following submenus: j general > configuration > identifi- cation j general > configuration > network j setting...
Page 20
20 reports /logs j show inputs f any process f nim_av: av input f ihm_jlcd: lcd interface + joystick f dbmanager: database manager f procesats: dvb processing f rfout: cofdm output f kernel: operational core of the unit f others: other programs 2) to apply the filter click on the apply filters butto...
Page 24
Ángel iglesias, s.A. Paseo miramón, 170 20009 san sebastián, spain tel. +34 943 44 88 00 fax +34 943 44 88 20 ikusi@ikusi.Com www.Ikusi.Com.