MAC TOOLS BK229 Operating instructions & parts manual - page 2
Save these instructions. For your safety, read and understand the information contained within. The owner and operator
shall have an understanding of this product and safe operating procedures before attempting to use this product. Make
certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product.
If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove from
service immediately. Inspect before each use. It is recommended that, prior to each use, an inspection be done by
qualified personnel and that any missing or damaged parts, decals, warning / safety labels or signs be replaced with factory
authorized replacement parts only. Any pump that appears to be damaged in any way, is worn, leaking or operates abnormally
shall be removed from service immediately until such time as repairs can be made. Any pump that has been or suspected
to have been subject to a shock load (a load dropped suddenly, causing the system pressure to exceed 10,000 PSI), shall
be removed from service immediately until checked by qualified personnel. Owners and operators of this equipment shall be
aware that the use and subsequent repair of this equipment may require special training and knowledge. Labels and owners
manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Mac Tools 10,000 PSI Heavy Duty Hydraulic Treadle Pump is designed to meet or exceed ANSI B30.1 Standards for
Performance and Safety. Its unique hydraulic circuit allows quick displacement of hydraulic fluid under no load conditions
and easy pumping in loaded conditions. These foot actuated pumps supply compressed hydraulic fluid to compatible
applications i.e. rams, presses, spreaders, compactors and crimping machines, anywhere that 10,000 PSI of fluid pressure
is needed. Special skill, knowledge and training may be required for a specific task and the product may not be suitable for
all the jobs described above. Unsuitable applications would include applications that call for a device to move, level or
support persons, animals, hazardous materials, mobile homes/ dwellings in general, mirrors and/or plate glass, and/or to
connect/secure hatches, components, etc. between bulkheads. The user must ultimately make the decision regarding
suitability of the product for any given task and assume the responsibility of safety for himself and others in the work area.
This category of Mac Tools Equipment allows quick displacement of hydraulic fluid, up to 10,000 PSI, to comparable rams,
presses, spreaders, compactors and crimping machines, anywhere that 10,000 PSI of fluid pressure is needed. Foot / Hand
Actuated treadle design delivers a controllable flow to and from the intended application.
Note: Always check connections before using !
2
Figure 1- Model BK229 Components
BK229-M0
SPECIFICATIONS
No Load
Load
BK229
91.5
10 1/4 x 5 1/4 x 7 3/8
66.5
10.98
90 - 175 3/8" -18NPTF
1/4" - 18NPT
18.1
Input Air
Pressure
(psi)
Output Port
Threads
Input Port
Threads
Weight
(lbs w/fluid)
Model
Number
Usable Oil
Capacity
(in
3
)
Pump Size
L x W x H
(in)
Output Flow Rate
(in
3
/min)
Input Port
(air)
Output Port
(fluid, not show)
Reservoir
Foot Pedal
Air Manifold