Mace CAM-77 Instruction Manual

Other manuals for CAM-77: Specifications
Manual is about: Digital Day & Night Vandal Resistant Dome Camera

Summary of CAM-77

  • Page 1

    1 digital day&night vandal dome information - this equipment has been tested and found to comply with limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a...

  • Page 2

    2 digital day&night vandal dome 3 digital day&night vandal dome features warning the camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction. If you use your camera around smoke or unusual heat for a long time, fire may be...

  • Page 3

    4 digital day&night vandal dome 5 digital day&night vandal dome contents features warnings and precautions names and functions of parts dimension installation cable connection lens osd vbs-extra 3axis bracket smps 2 3 9 11 12 13 10 10 11 11 11 components 8 camera operation troubleshooting menu setti...

  • Page 4

    7 digital day&night vandal dome 6 digital day&night vandal dome precautions • if the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur. • please check that the power satisfies the normal specification before connecting the camera. Note do not install the c...

  • Page 5

    9 digital day&night vandal dome names and functions of parts 8 digital day&night vandal dome components 1. Color dome camera 2. Screws 4. Wire for vbs-extra 5. Instruction guide 3. Wrench ¥l ¥m ¥n ¥o ¥p cam77 2005.10.13 8:46 pm ˘ ` 8 mac001 600dpi 100lpi.

  • Page 6

    11 digital day&night vandal dome names and functions of parts dimension 10 digital day&night vandal dome names and functions of parts vbs-extra for connecting to lcd please use the supplied wire when connecting to lcd 3axis bracket please loosen screws and fix tilted and panned position. Smps pcb fo...

  • Page 7

    13 digital day&night vandal dome 12 digital day&night vandal dome installation cable connection 1. Dome base mounting - open the dome cover by unscrewing 3 screws using special wrench provided. - mount the base of camera to a sturdy surface using 4 screws (1.5 inch) and 4 premade holes on the base o...

  • Page 8

    15 digital day&night vandal dome settings can be made using the 5 buttons located in the camera. 1. Please press the setup button settings can now be made. The setup menu is displayed on the monitor. 2. Please select any function you wish to activate by using the up and down buttons. The arrow can b...

  • Page 9

    17 digital day&night vandal dome manual : manual lens selection dc : auto iris lens selection 3. Please press the setup button if you wish to return to the previous menu 16 digital day&night vandal dome camera operation setup lens manual shutter esc white bal. Atw backlight off agc low dnr low sens-...

  • Page 10

    Auto or manual control can be selected. 1. When the setup menu is on the screen, please position the arrow to point to 'shutter' by using the up and down buttons. 2. Please select the shutter mode by pressing the left or right button. Flk : please select 'flk' mode when flickering occurs on the scre...

  • Page 11

    21 digital day&night vandal dome 20 digital day&night vandal dome camera operation when there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the backlight function. 1. Please position the arrow to point to 'backlight' on t...

  • Page 12

    23 digital day&night vandal dome 22 digital day&night vandal dome camera operation the background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'dnr' on the setup menu by using the up and down buttons. 2. Please select the...

  • Page 13

    25 digital day&night vandal dome 24 digital day&night vandal dome camera operation 1. Please position the arrow to point to 'special' on the setup menu by using the up and down buttons. 2. Please select the mode you wish to operate by pressing the up or down button. Camera id : if the id is input, t...

  • Page 14

    27 digital day&night vandal dome sync : two synchronization modes are available internal and external line-lock. In line-lock mode, it synchronizes the video signal between cameras without a synchronous generator. The line-lock synchronization is only used in the areas of 60hz (ntsc models) / 50hz (...

  • Page 15

    29 digital day&night vandal dome • please select the area you do not wish to appear from the 4 areas in area sel mode. • please select on mode for the chosen area. • please adjust the size of the area to be concealed by using the up, down, left or right button. Mirror - on : sets a horizontal image ...

  • Page 16

    31 digital day&night vandal dome 30 digital day&night vandal dome troubleshooting if there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems nothing appears on the screen. The video image is not cle...

  • Page 17

    33 digital day&night vandal dome warranty 32 digital day&night vandal dome specifications item power source total pixels effective pixels size scanning system synchronization frequency resolution video output s/n (y signal) min. Illumination color gain control white balance electronic shutter speed ...

  • Page 18

    Mace electronic surveillance products 3233 sw 2nd ave. Fort landerdale, fl 33315 usa toll-free(877)585-mace local(954)585-6223 fax(954)585-6225 www.Mace.Com mace electronic surveillance products digital day & night vandal resistant dome camera model : cam77 instruction guide cam77 2005.10.13 8:46 pm...