Mace LED CCTV User Manual - page 9
8
Mace® LED CCTV Security Surveillance Monitors
The monitor is a sensitive piece of electronic equipment. Proper care can prevent accidental
damage to the LED panel or the monitor itself. By following these guidelines you can ensure
many years of trouble-free use.
1. The LED monitor’s casing and LED glass panel can be cleaned with a soft, lint-free
cloth. Never use scrub pads or other cleaning materials with abrasive surfaces to
clean your LED monitor!
a) A slightly damp cloth or newspaper may be used to clean the glass plate of
fingerprints or smudges.
b) For the plastic case, a mild detergent may be used to clean the surface.
However, you should ensure not to use too much detergent or water as this
could leak into the interior of the casing.
2. DO NOT use cleaning fluids based on alcohol, methylated spirit, or ammonia. The
glass plate has a hard surface coating to prevent scratches. However, the use of
strong chemical cleaning agents may damage this coating. Use only a mild soap
or detergent and water or specially formulated cleaners made for cleaning glass
panels.
3. Avoid direct contact with water or other liquids. Never use the LED monitor in or
around areas where water may pose a potential hazard to normal operation.
4. Only use the LED monitor indoors, and avoid monitor contact with oil, vapor,
steam, moisture and dust. The LED monitor should be used in a clean and low
humidity environment.
5. Keep the LED monitor away from heaters or other heat sources such as lighting
equipment or direct sunlight.
6. Keep the LED monitor away from sharp objects.
WARNING:
Any unauthorized modification to this equipment could result in the revocation of the
authorization to operate the equipment and void the product warranty.
Caring for your LED Security Monitor
4