Mace MacePro MPC-VD-2812 User Manual - Installation
of
8
4
INSTALLATION
1. Remove the camera dome cover.
2. Mount the dome body to a suitable surface using appropriate fasteners.
3. Aim camera using the 3-axis mounting system.
4. Connect the BNC video cable to the coax cable leading to the DVR or Monitor video input.
5. Connect the power cable.
6. Close the dome.
Note: The camera is supplied with the focus pre-set, however, lens focus
may be adjusted if needed.
POWER AND VIDEO OUTPUT JACK
A center pin positive barrel connector is available for AC or DC voltage (12vdc or 24vac).
A BNC connector provides an analog video output.
ZOOM
Adjust varifocal lens for correct depth of field prior to closing dome housing.
FOCUS
Adjust focus prior to closing dome housing.
144.3
mm
115.0
mm
8.0
mm