Mach M12T User Manual

Summary of M12T

  • Page 1

    Touring series user manual m12t m15t m30t m181t m182t m1201t m1502t.

  • Page 2

    © 2000 - 2001 martin professional a/s, denmark. All rights reserved. No part of this manual may be reproduced, in any form or by any means, without permission in writing from martin professional a/s, denmark. Revision c printed in denmark..

  • Page 3

    3 d e s i g n c o n c e p t the touring series consists of two product types: the slingshot series with 55° x 35° dispersion for long throw applications, and the t series with 55° x 45° dispersion for medium throw applications. Both types have the same horizontal dispersion, but the t series has gre...

  • Page 4

    4 c o n n e c t i o n s p a s s i v e m o d e all models in the t-series are connected through the 1+/1-pins on the speakon® plug in passive mode. The crossover is located directly behind the speakon® terminal. Wire the crossover as shown for passive mode operation. P a s s i v e m o d e : m 1 2 t ,...

  • Page 5

    5 a c t i v e m o d e in active mode, the woofers are connected through the 1+/1- pins and the compression drivers through the 2+/2- pins. A c t i v e m o d e w i r i n g ( a l l m o d e l s ) • red (woofer +) to low a • black (woofer -) to low - • orange (tweeter +) to high a2 • blue (tweeter -) to...

  • Page 6

    6 table 1: active mode specifications model driver power handling iec 268 impedance crossover point polarity m12t 2" 125 watt 16 ohm 1.3 khz a a. All crossover slopes should be 24 db linkvitz riley inverted 12" 400 watt 8 ohm 1.3 khz normal m15t 2" 125 watt 16 ohm 1.3 khz normal 15" 500 watt 8 ohm 1...

  • Page 7

    7 f l y i n g t h e s p e a k e r s all top-boxes in the touring series feature an integrated 3-point flying system. We recommend the double stud & ring for flying track (p/n 93944003), manufactured by atm, for use with all models. The certified load of the stud mounted into the flying track is 274 ...

  • Page 8

    S e r v i c e t o o l s the following tools are required for servicing the speakers. T o p - b o x e s & s t a g e m o n i t o r s • woofers: ..................................................................................................................... Um4 • horns:...............................