Mackie Art Series ART200A Specifications - Specifications
Two-Way Active Speaker System
ART200A
SPEAKER
ART200A
oF 6 PAGES
2
O F 6 P A G E S
Specifications
System Acoustic
Frequency Range (–10 dB):
50Hz–19kHz
Frequency Response (–3 dB):
70Hz–17kHz
Horz. Coverage Angle (–6 dB):
90°, averaged
1kHz to 10kHz
Vert. Coverage Angle (–6 dB):
70°, averaged
1kHz to 10kHz
Directivity Factor; Q(DI):
9.5 (9.8), averaged
1kHz to 10kHz
System Sensitivity
1
:
101dB 1W @ 1m
Rated Maximum Peak
2
:
122dB @ 1m
Crossover:
1.8kHz, 24dB/octave,
0.3mS HF delay
Speaker Protection:
Thermal, over-excursion
Transducers
Low-Frequency:
12" (300mm) woofer
High-Frequency:
Polynomial horn-loaded
1" (25mm) compression driver
Electronics
Power Amplifier Rating:
LF: 120W, HF: 40W
Distortion:
0.1% THD, nominal power @
1kHz and 10kHz
Inputs:
Mic: 8mV, 1.3k
Ω
balanced,
650
Ω
unbalanced, XLR
Line: 125mV, 19k
Ω
balanced, 10k
Ω
unbalanced
Output:
XLR connector, parallel to input
Indicators:
Power On, Limiter active
Controls, Switch:
Mic/Line, Music/Voice EQ,
Power On/Off, Voltage
Selector Music EQ: Off/+4dB @ 65Hz,
+4dB @ 12kHz
Voice EQ: Off/+4dB @ 3kHz,
+4dB @ 6kHz
Controls, Rotary:
Input Volume
Electronics Protection:
Thermal, limiting, short circuit
Power Requirements:
115/230 VAC, 2A, 50/60Hz
Physical
Enclosure:
Gray, semi-trapezoidal,
reinforced polypropylene
Dimensions (HxWxD):
24.42" x 15.36" x 12.29"
(620mm x 390mm x 312mm)
Weight:
39.7lbs. (18kg)
Mounting:
Four M10 metal threaded inserts,
1.375" (35mm) lockable stand mount
1
Measured on axis in the far field, referenced back to 1 watt RMS from maximum power and to 1 meter
distance using the inverse square law. Listed sound pressure represents an average from 300Hz to 3kHz.
2
RMS using 20Hz to 20kHz, PN Spectrum, Peak for 2 hours with +6 dB crest factor.
Options
ART A-2
Wall mount bracket, black
ART A-5
Swivel, tilt, wall mount
hardware, black
ART A-7
Full front metal grille, black
ART A-11
U-bracket, black