Mackie Fussion 1800 User Manual - Lend Me Your Ears

Other manuals for Fussion 1800: Hook-up Manual, Specifications
Manual is about: Mackie Subwoofer System User's Manual 1800SA, 1800S

Summary of Fussion 1800

  • Page 1

    Fussion 1800sa & 1800s active sound reinforcement subwoofer system user’s manual.

  • Page 2: Caution

    Caution avis risk of electric shock do not open risque de choc electrique ne pas ouvrir caution: to reduce the risk of electric shock do not remove cover (or back) no user-serviceable parts inside refer servicing to qualified personnel attention: pour eviter les risques de choc electrique, ne pas en...

  • Page 3: Lend Me Your Ears

    3 ©2000 mackie designs inc. All rights reserved. Printed in italy. Rev. B lend me your ears exposure to extremely high noise levels may cause permanent hear- ing loss. Individuals vary considerably in susceptibility to noise-in- duced hearing loss, but nearly everyone will lose some hearing if expos...

  • Page 4: Introduction

    4 introduction thank you for choosing mackie designs’ active sound reinforcement speaker systems. The fussion 1800sa and 1800s is an extreme output active subwoofer system. Designed to live on the road, this subwoofer system is a double 18˝ design broken down into two individual enclosures that make...

  • Page 5: Rear Panel Description

    5 rear panel description power switch switch up to turn the fussion 1800sa on, and switch down to turn it off. Make sure the signal source’s level control is turned down before you turn it on. Power indicator when the power switch is turned on, and the linecord is connected to an active ac mains sup...

  • Page 6: Connections

    6 connections balanced xlr connectors power out 35-85hz min. 8 1 4 2 3 + – the loop out connector allows you to connect more than one fussion 1800sa to the sub out connector from your fussion full-range active speaker system. Simply plug the sub out into the first main input jack, and patch that spe...

  • Page 7: Placement

    7 placement the fussion 1800sa and 1800s subwoofers are designed to sit on the floor or sturdy stands. You can stack cabinets vertically. If you do, place the fussion 1800sa and 1800s on the bottom of the stack, side by side, and place the full-range active fussion series cabinets on top. If you sta...

  • Page 8: Rigging

    8 rigging the fussion 1800sa and 1800s cabi- nets are not designed for rigging or flying. The cabinets are for floor-mounting only. Warning: never attempt to suspend the fussion 1800sa or 1800s loudspeakers by their handles. Ac power the fussion 1800sa is shipped with a connector that mates with the...

  • Page 9: Service Information

    9 • is the power/protect led lit red on the fussion series active speaker? Make sure there is at least six inches of free space behind the heatsinks. Poor bass performance • check the polarity of the connections between the mixer and the loudspeak- ers. You may have your positive and negative connec...

  • Page 10: Repair

    10 repair service for the fussion 1800sa and 1800s is available only from one of our authorized domestic service stations or at the factory service center, located in whitinsville, massachusetts. Service out- side the united states can be obtained through local dealers or distributors. If your fussi...

  • Page 11

    11 fussion 1800sa/1800s specifications physical properties enclosure: 18mm multi-layered birch wood enclosure geometry: rectangular handles: 4 each aluminum/rubber grips mounting methods: floor mount only height: 32.9˝ (836mm) width: 23.6˝ (600mm) depth: 23.6˝ (600mm) weight: 1800sa 145 lbs. (65.8kg...

  • Page 12

    Some of the people at our woodinville, washington factory who helped design, build, sell, and support your product. Some of the people at our woodinville, washington factory who helped design, build, sell, and support your product. ® ® ® ™ mackie designs inc. Mackie designs inc. 16220 wood-red rd. N...