- DL manuals
- Mackie
- Speakers
- HD1221
- Owner's Manual
Mackie HD1221 Owner's Manual
Summary of HD1221
Page 1
Hd1221 o w n e r ’ s m a n u a l 2-way high-definition powered loudspeaker.
Page 2
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install n...
Page 3: Introduction
Introduction the hd1221 powered loudspeaker represents a major step into portable high-definition live sound, providing precise, articulate full-range sound at the high-output levels demanded of modern pa systems. Two class-d fast recovery™ amplifiers efficiently drive 1200 watts of total system pow...
Page 4: Hookup Diagrams
Hd1221: 2-way system hookup diagrams this simple system may be utilized in a variety of ways anywhere high-output and easy setup are needed. Great for wedding djs to vocal reinforcement to full band pa, the hd1221 is the perfect setup when you need a high- output, ultra-portable pa. In this example,...
Page 5
Hd1221: 3-way system with powered subwoofers mackie hd1221 powered loudspeaker reproduces all frequencies above the subwoofer’s crossover point mackie hd1221 powered loudspeaker reproduces all frequencies above the subwoofer’s crossover point power cord pole mount line level high pass output a line ...
Page 6
Hd1221: monitor setup mackie hd1221 powered loudspeakers strewn across the stage in monitor position power cord power cord power cord power cord aux sends 1-3 to mackie hd1221 powered loudspeaker main inputs mackie hd1221 powered loudspeaker loop out to mackie hd1221 powered loudspeaker main input f...
Page 7: Rear Panel Features
Rear panel features 1. Main input this is a female xlr-type connector that accepts a balanced line-level signal from a mixing console or other signal source. See appendix b for more information about this connector. 2. Loop out this is a male xlr-type connector that produces exactly the same signal ...
Page 8
7. Level this controls the overall signal level at the input to the built-in power amplifiers. It ranges from –6 db to +6 db of gain. The center detent is 0 db (unity gain). Use this control to vary the level of the hd1221 versus other loudspeakers and subwoofers in your system. Be sure to keep an e...
Page 9: Placement
Warning: installation should only be done by an experienced technician. Improper installation may result in damage to the equipment, injury or death. Make sure that the loudspeaker is installed in a stable and secure way in order to avoid any conditions that may be dangerous for persons or structure...
Page 10: Room Acoustics
Room acoustics the hd1221 loudspeakers are designed to sound neutral; that is, to reproduce the input signal as accurately as possible. Room acoustics play a crucial role in the overall performance of a sound system. Here are some additional placement tips to help overcome some typical room problems...
Page 11: Rigging
Rigging hd1221s may be individually flown horizontally or vertically using m10 x 1.5 x 37 mm forged shoulder eyebolts. Warning: installation should only be done by an experienced technician. Improper installation may result in damage to the equipment, injury or death. Make sure that the loudspeaker ...
Page 12: Flown Vertically
Flown vertically flown horizontally flown horizontally with mackie hd1801 subwoofer important rigging reminder: to reiterate, mackie is not in the business of providing complete rigging systems, either as designers, manufacturers, or installers. It is the responsibility of the installer to provide a...
Page 13: Thermal Considerations
Thermal considerations the hd1221 has two powerful built-in amplifiers capable of producing a combined 600 watts of rms power. As an amplifier works, it produces heat. The higher the signal level, the louder and hotter it gets. It is important to dissipate the heat as quickly as possible. This resul...
Page 14: Poor Sound
• poor bass performance may be the result of bad ac power. See the section titled ‘ac power’ on the previous page for further details. Poor sound • is it loud and distorted? Make sure that you’re not overdriving a stage in the signal chain. Verify that all level controls are set properly. • is the i...
Page 15: Appendix B: Connections
Appendix b: connections “xlr” connectors the hd1221 has one female xlr input that accepts a balanced line-level signal. When connecting a balanced signal, be sure it’s wired per aes (audio engineering society) standards: xlr pin 1 – shield (ground) pin 2 – hot (+) pin 3 – cold (–) there is also a ma...
Page 16: Hd1221 Specifications
Acoustic performance: frequency response (-10 db) 55 hz – 20 khz frequency response (-3 db) 65 hz – 18 khz horizontal coverage (–6 db) 1 90˚ averaged 2 khz to 10 khz vertical coverage (-6 db) 1 50˚ averaged 2 khz to 10 khz max peak spl (calculated) 2 133 db max peak spl (measured) 3 124 db crossover...
Page 17: Hd1221 Block Diagram
Correct disposal of this product. This symbol indicates that this product should not be disposed of with your household waste, according to the weee directive (2002/96/ec) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and el...
Page 18: Hd1221 Dimensions
Hd1221 dimensions hd1221 frequency response 15.2 in / 386 mm 16.2 in / 411 mm 60˚ 24.0 in / 610 mm 15.7 in / 399 mm 15.0 in / 380 mm weight 50 lb 22.7 kg ! " # ! ! 5at`dt]rh7i s1b?; =^a\p[ 2^]c^da 18 hd1221 hd1221.
Page 19: Mackie Limited Warranty
Mackie limited warranty please keep your sales receipt in a safe place. This limited product warranty (“product warranty”) is provided by loud technologies inc. (“loud”) and is applicable to products purchased in the united states or canada through a loud-authorized reseller or dealer. The product w...
Page 20
16220 wood-red road ne • woodinville, wa 98072 • usa united states and canada: 800.898.3211 europe, asia, central and south america: 425.487.4333 middle east and africa: 31.20.654.4000 fax: 425.487.4337 • www.Mackie.Com e-mail: sales@mackie.Com.