Mackie HDR 24 Operation Manual - page 18
18
HDR 24/96
HDR
24/
96
I/O Card 17-
24
ADAT
ADAT
Setup
Setup AES Card - Slot 3
Pro
Pro
Stadus Bits:
Pro
Pro
Consumer
Pro
Sample Rate Conversion:
1- 2
Converted
3- 4
Converted
5- 6
Converted
7- 8
Converted
Optimal settings are - NOT converted and Pro.
1. Select
Setup
from the Windows menu (or use
keyboard shortcut
CTRL+1
).
2. Click the
Digital
I/O
icon. For each PDI•8 card,
click the
Setup
button. In the AES/EBU Setup
dialog, check the
Converted
boxes corresponding
to the desired input(s) to enable sample rate
conversion; leave the boxes unchecked for no
sample rate conversion (default).
3. Then select
Pro
(default) or
Consumer
from the
pulldown menus associated with the desired
output(s). Click the arrow in the top right corner of
the dialog or hit
ESC
to exit.
Note:
Note:
Note:
Note:
Note: When sample rate conversion is active, the input signal is truncated to 20
bits, causing a slight degradation in the signal quality of a 24-bit input. Therefore
sample rate conversion should be enabled only when intentionally converting a
signal to a different sample rate (e.g., from 44.1k to 48k), or when no other means
exist to establish clock synchronization with the device(s). See the Technical Ref-
erence Guide for details.
AIO-8
DIO-8
PDI-8