1. DL manuals
  2. Mackie
  3. Subwoofer
  4. MR10SMK3
  5. Owner's Manual

Mackie MR10SMK3 Owner's Manual

Other manuals for MR10SMK3: Quick Start Manual
Manual is about: Powered studio subwoofer

Summary of MR10SMK3

  • Page 1

    O w n e r ’ s m a n u a l powered studio subwoofer mr10smk3.

  • Page 2

    2 mr10smk3 mr10smk3 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions....

  • Page 3: Contents

    Part no. Sw0980 rev. B 12/13 ©2013 loud technologies inc. All rights reserved. 3 owner’s manual owner’ s manual contents mr10smk3 features • powerful, deep extended bass for your mrmk3 studio monitors • designed for high-output and superior low-frequency performance • 120 watts of class a/b amplific...

  • Page 4: Introduction

    4 mr10smk3 mr10smk3 introduction as versatile as your application all studio spaces are different. As such, having the right connection types and customizable control over your acoustics is necessary. Adding an mr10smk3 studio subwoofer to your system only adds to the experience. It not only deliver...

  • Page 5: Quick Start

    5 owner’s manual owner’ s manual quick start we realize that you can’t wait to hook up your mr10smk3 studio subwoofer and try it out. Nevertheless, please take the time to read this page now, and the rest can wait until you’re good and ready. 1. Turn the input level [9] control on the back of the ca...

  • Page 6: Rear Panel Description

    6 mr10smk3 mr10smk3 rear panel description 3. Power switch press this switch left to turn the mr10smk3 studio subwoofer on. Make sure the level control [9] is down before you turn it on. When the power switch is turned on and the mr10smk3 studio subwoofer is plugged into an ac outlet, the led [6] il...

  • Page 7

    7 owner’s manual owner’ s manual 7. Polarity switch this switch – when left – sends a normal (0˚) polarity of the signal into the subwoofer amplifier. It has no effect on the signal at the outputs. This switch – when right – reverses the polarity of the signal going into the subwoofer amplifier by 1...

  • Page 8: Input Signal Wiring

    8 mr10smk3 mr10smk3 input signal wiring we recommend using high-quality, shielded cables to connect the signal source to the signal input jacks [4] on mr10smk3 studio subwoofers. Two types of input connectors are provided to interface with virtually any application you may have: • balanced microphon...

  • Page 9: The Ins and Outs of Polarity

    9 owner’s manual owner’ s manual the ins and outs of polarity the mr10smk3 studio subwoofer includes a switch that allows you to quickly invert the polarity of the subwoofer’s output relative to the input signal it is receiving from the mixer or other sound source. But what exactly does that mean? A...

  • Page 10: No Sound

    10 mr10smk3 mr10smk3 appendix a: service information no sound • is the power led [6] on the rear panel illuminated? If not, refer to “no power” to the left. • is the input level [9] control turned up? • is the signal source turned up? Make sure the signal level from the mixing console (or whatever d...

  • Page 11: Repair

    11 owner’s manual owner’ s manual repair for warranty service, please refer to the warranty information on page 15. Non-warranty service is available at a factory- authorized service center. To locate the nearest service center, visit www.720trees.Com, click “contact tech support” and select “locate...

  • Page 12: Balanced Xlr Input Connector

    12 mr10smk3 mr10smk3 balanced xlr input connector xlr connectors are used to make balanced connections to the mr10smk3 studio subwoofers. They are wired as follows, according to standards specified by the aes (audio engineering society). Xlr pin 1 – shield (ground) pin 2 – positive (+ or hot) pin 3 ...

  • Page 13: Mr10Smk3 Specifications

    13 owner’s manual owner’ s manual appendix c: technical information ac power requirements us: 120 vac, 60 hz europe: 240 vac, 50 hz korea: 220 vac, 60 hz japan: 100 vac, 50/60 hz note: mr10smk3 subwoofers do not support multiple voltage configurations. Make sure the voltage rating for your particula...

  • Page 14: Mr10Smk3 Dimensions

    14 mr10smk3 mr10smk3 mr10smk3 dimensions mr10smk3 block diagram 15" / 381 mm 12.6" / 320 mm 15" / 381 mm weight 27.3 lb / 12.4 kg xlr balanced line inputs 1/4" balanced line inputs 1/4" balanced line outputs input level variable lp [40 hz – 180 hz] r l lo-frequency driver lo-frequency power amplifie...

  • Page 15: Limited Warranty

    15 owner’s manual owner’ s manual limited warranty please keep your sales receipt in a safe place. This limited product warranty (“product warranty”) is provided by loud technologies inc. (“loud”) and is applicable to products purchased in the united states or canada through a loud-authorized resell...

  • Page 16

    16220 wood-red road ne woodinville, wa 98072 • usa phone: 425.487.4333 toll-free: 800.898.3211 fax: 425.487.4337 www.720trees.Com.