1. DL manuals
  2. Mackie
  3. Musical Instrument
  4. Onyx 2480
  5. Owner's Manual

Mackie Onyx 2480 Owner's Manual

Manual is about: Premium Live Analog Mixers with Perkins EQ & Onyx MIC Preamps

Summary of Onyx 2480

  • Page 1

    O w n e r ’ s m a n u a l premium live analog mixers w/perkins eq & onyx mic preamps.

  • Page 2

    Onyx 80 series onyx 80 series 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instr...

  • Page 3: Table of Contents

    Part no. Sw0598 rev. B 01/08 ©2005-2008 loud technologies inc. All rights reserved. Owner’s manual owner’ s manual table of contents introduction ................................................................................................................4 getting started ...........................

  • Page 4: Introduction

    4 onyx 80 series onyx 80 series introduction thank you for choosing a mackie onyx 80 series professional live mixing console. The onyx 80 series of mixers feature all-new analog circuitry and the latest technologies for live sound reinforcement in a durable, road-worthy package. The onyx 80 series m...

  • Page 5: Getting Started

    5 owner’s manual owner’ s manual getting started read this page!! Even if you’re one of those people who never read manuals, all we ask is that you read this page now before you begin using the onyx 80 series. You’ll be glad you did! Zero the controls 1. Turn down the channel gain, aux, and fader co...

  • Page 6: Hookup Diagrams

    6 onyx 80 series onyx 80 series stereo power amplifier in (record) stereo compressor mono compressor multi effect processor mono power amplifier stage monitors left pa speaker right pa speaker stereo eq mono eq headphones keyboard or other line level input stereo guitar effects drum machine bass gui...

  • Page 7

    7 owner’s manual owner’ s manual onyx 2480 multitrack recording in a studio (tracking) the direct outs provide an analog balanced direct output for each chan- nel, tapped after the gain control and eq controls. The main outs are used for monitors in the studio, and the monitor outs are used for moni...

  • Page 8

    8 onyx 80 series onyx 80 series onyx 2480 computer recording in this hookup diagram, the tracking channels are routed to the group 1-8 outputs. These are connected to the analog audio interface to your daw or laptop. A 2-track return is provided by the daw (or laptop) to stereo aux input 4 on the on...

  • Page 9

    9 owner’s manual owner’ s manual onyx 2480 house of worship power amp mono mode in (record) stereo compressor mono compressor mono power amplifier stage monitors left pa speaker right pa speaker stereo eq mono eq headphones mono eq keyboard or other line level input stereo guitar effects drum machin...

  • Page 10: Onyx 80 Series Features

    10 onyx 80 series onyx 80 series onyx 80 series features channel strips depending on the model that you purchased, there are 24, 32, 40, or 48 channel strips. Each channel has a mic and line input connector and an insert jack for connect- ing an external signal processor. 1. 48v phantom power switch...

  • Page 11: 6. High Eq

    11 owner’s manual owner’ s manual when connected to the 1/4" jack, there is 20 db of attenuation all the way down, and 40 db of gain fully up, with a “u” (unity gain) mark at about 10:00. 6. High eq this control gives you up to 15 db boost or cut at 12 khz, and it is also flat at the center detent. ...

  • Page 12: 1. Aux Sends

    1 onyx 80 series onyx 80 series group assign 5-6 1-2 3-4 7-8 main mix 10 db 30 20 10 o o 40 5 5 u 60 50 ol +10 0 -20 o o max o o max o o max o o max o o max o o max o o max o o max 1 mute group freq u +15 -15 u +15 -15 u +15 -15 u +15 -15 high 12 khz high mid low 80 hz freq low mid 100hz gain + 40db...

  • Page 13: 18. Mute

    1 owner’s manual owner’ s manual 17. Mute group assign switches use these switches to assign the channel to one or more mute groups. The master mute groups [54] are lo- cated in the master section next to the talkback section. When a master mute group switch is pressed, all the channels assigned to ...

  • Page 14: Auxiliary Section

    14 onyx 80 series onyx 80 series soloed channels are sent to the phones output, monitor outputs, and solo meters. Pfl mode (pre- fader listen) sends the channel’s signal after the gain and eq controls, but before the channel fader, to the pfl solo bus. Afl mode (after-fader listen), sends the signal...

  • Page 15: 0. Stereo Switch

    15 owner’s manual owner’ s manual 8. Aux send 1 and (aux inputs 1-4) aux send 5 and 6 (aux inputs 5-8) these tap a portion of each channel’s signal out to ei- ther an effects processor or for stage monitoring. These go to the same aux send buses as the mono channel aux sends. The aux input aux sends...

  • Page 16: Master Aux Send Section

    16 onyx 80 series onyx 80 series 10 db 30 20 10 o o 40 5 5 u 60 50 ol +10 0 -20 10 db 30 20 10 o o 40 5 5 u 60 50 ol +10 0 -20 aux 1 aux 2 group 1 group 2 o o +15 gain o o +15 gain group/aux flip group/aux flip pan main mix r l pan main mix r l stereo mute mute afl afl mute mute afl afl stereo maste...

  • Page 17: 45. Afl Solo Switch

    17 owner’s manual owner’ s manual main to mon/phones phones level solo o o max o o max monitor o o max 10 db 30 20 10 o o 40 5 5 u 60 50 main mix phones/ monitor 0db=0dbu matrix a b a b 20 10 7 4 2 0 2 4 7 10 20 30 20 10 7 4 2 0 2 4 7 10 20 30 l solo r clip rude solo pfl afl group 1 matrix master de...

  • Page 18: 49. Rude Solo Lights

    18 onyx 80 series onyx 80 series 49. Rude solo lights these leds flash on and off when a channel’s solo is active, as an additional reminder beyond the indicating leds next to each pfl or afl button. The green led indicates pfl solo mode, and the amber led indicates afl solo mode. If you work on a m...

  • Page 19: 57. Talkback Switch

    19 owner’s manual owner’ s manual talkback section, mute groups, and mono out by the way, it is okay to have more than one destina- tion switch pushed in at the same time. The talkback signal will be routed to all the destinations you have selected. But if you don’t have any of the destination switc...

  • Page 20: Main Mix and Phones/

    0 onyx 80 series onyx 80 series main mix and phones/ monitor section 60. Main mix faders these are the master faders that control the levels at the main outs. When main mix to mon/phones [62] is selected in the phones/monitor section, the main mix fader also controls the main mix level in the phones...

  • Page 21: Rear Panel

    1 owner’s manual owner’ s manual risk of electric shock do not open replace with the same type fuse and rating. Disconnect supply cord before changing fuse utilise un fusible de rechange de mÊme type. Debrancher avant de remplacer le fusible warning: to reduce the risk of fire or electric shock, do ...

  • Page 22: 70. Direct Outs

    Onyx 80 series onyx 80 series risk of electric shock do not open replace with the same type fuse and rating. Disconnect supply cord before changing fuse utilise un fusible de rechange de mÊme type. Debrancher avant de remplacer le fusible warning: to reduce the risk of fire or electric shock, do not...

  • Page 23: 76. Talkback Mic In

    Owner’s manual owner’ s manual 76. Talkback mic in this is where you plug in your external talkback microphone. This female xlr connector does not have phantom power, so use a dynamic microphone or a self- powered condenser microphone. 77. Talkback line out this 1/4" trs output connector provides a ...

  • Page 24: 84. Power Receptacle

    4 onyx 80 series onyx 80 series insert main outs left right 1 (mono) left right 2 (mono) left right 3 (mono) left right 4 (mono) left right 5 (mono) left right 6 (mono) left right 7 (mono) left right 8 (mono) main insert (tip=send ring=return) monitor out mono mic in line out talkback right left bal...

  • Page 25: Troubleshooting

    5 owner’s manual owner’ s manual appendix a: service information if you think your mackie product has a problem, please check out the following troubleshooting tips and do your best to confirm the problem. Visit the support section of our website (www.Mackie.Com/support) where you will find lots of ...

  • Page 26: Repair

    6 onyx 80 series onyx 80 series repair for warranty repair or replacement, refer to the war- ranty information on page 35. Non-warranty repair for mackie products is available at a factory-authorized service center. To locate your nearest service center, visit www.Mackie.Com, click “support” and sel...

  • Page 27: Appendix B: Connections

    7 owner’s manual owner’ s manual appendix b: connections 1/4" ts phone plugs and jacks “ts” stands for tip-sleeve, the two connection points available on a mono 1/4" phone jack or plug. They are used for unbalanced signals. Sleeve tip tip sleeve tip sleeve 1/4" ts unbalanced wiring: sleeve = shield ...

  • Page 28: Mults and “Y”S

    8 onyx 80 series onyx 80 series • when connecting an unbalanced output to a bal- anced input, be sure that the signal high (hot) connections are wired to each other. The unbal- anced ground (earth) connection should be wired to the low (cold) and the ground (earth) connec- tions of the balanced inpu...

  • Page 29: Db25 Connectors

    9 owner’s manual owner’ s manual db25 connectors the direct outs on the back of the onyx 80 series provide balanced direct outputs for all the mono chan- nels on female db25 connectors. These connectors are pin-for-pin compatible with the analog (not tdif) db25 connectors found on tascam dtrs record...

  • Page 30: Appendix C: Technical Info

    0 onyx 80 series onyx 80 series appendix c: technical info onyx 80 series specifications frequency response mic input to main output (gain @ unity) +0, –1 db, +0, –3 db, distortion (thd & imd) mic input to main output (@ +4 dbu) thd: smpte imd: dynamic range >105 db, 24 channels assigned >115 db, on...

  • Page 31

    1 owner’s manual owner’ s manual channel level led (sensitivity) 0 led = 0 dbu (normal operating level) vu meters main and solo left and right, 12 segments: clip (+20), +10, +7, +4, +2, 0, –2, –4, –7, –10, –20, –30 0 led = 0 dbu ac power requirements power consumption: onyx 2480 180 watts onyx 3280 ...

  • Page 32: Onyx 80 Series Dimensions

    Onyx 80 series onyx 80 series onyx 80 series dimensions matrix premium live analog mixer with perkins eq and onyx mic preamps group 1 matrix master talkback left right group 2 group 3 group 4 group 5 group 6 group 7 group 8 power 1 2 3 4 2 1 3 7 5 4 6 8 5 6 7 8 12 11 10 16 15 14 13 9 aux send mute 9...

  • Page 33: Onyx 80 Series Block Diagram

    Owner’s manual owner’ s manual onyx 80 series block diagram l r pfl l main main mix l main mix r p an pfl a ux sends left right group 1 out group 2 out a ux 1 out a ux 1 le ve l l sum r sum group 1 group 2 1 2 group aux 1 a ux 1 group meters assign talkbac k assign talkbac k mi c aux 2 to a ux 1-2 a...

  • Page 34

    4 onyx 80 series onyx 80 series +30 dbu max in 20 db loss, trim down 40 db gain, trim up line in, mono channels mic in, mono channels 60 db gain, trim up 0 db gain, trim down +21 dbu max in +15 db up –15 db down –15 db down –15 db down low +15 db up –15 db down low mid +15 db up high mid +15 db up h...

  • Page 35

    5 owner’s manual owner’ s manual onyx 80 series limited warranty a. Loud technologies inc. Warrants all materials, workmanship and proper operation of this product for a period of one year from the original date of purchase. You may purchase an additional 24-month extended warranty (for a total of 3...

  • Page 36

    16220 wood-red road ne • woodinville, wa 98072 • usa united states and canada: 800.898.3211 europe, asia, central and south america: 425.487.4333 middle east and africa: 31.20.654.4000 fax: 425.487.4337 • www.Mackie.Com e-mail: sales@mackie.Com.