Mackie Remote 48 User Manual - Operation
Us
er’
s
Guide
7
Remote 48 User’s Guide
Stop
STOP
brings the “tape” to an
immediate halt. STOP also
punches out of record and
cancels master record
standby.
Play
PLAY
puts the HDR24/96 into play; it also punches out of
record and cancels master record standby.
Fast Forward/Rewind
FAST FWD
and REWIND put the HDR24/96 into fast wind
mode from any state. They behave just like a large
multitrack recorder. When REWIND or FAST FWD are
pressed, the “tape” rolls slowly at first, then accelerates to
20X speed in a few seconds. Pressing either button a
second or third time puts the transport into even faster
wind speeds.
Record
Press PLAY and RECORD simultaneously to begin
recording. Press any transport button except Record, Jog,
or Shuttle to stop recording. The Record LED glows when
recording, and blinks when RECORD is engaged with no
tracks armed. In a 48-track system, the Record LED
glows when either HDR24/96 is recording.
Transport Locate
Pressing the transport LOCATE
button causes the transport to jump
to the time displayed in the Locate
Time window. The Locate LED glows
whenever Tape Time = Locate Time,
otherwise it is off. The Remote 48
LOCATE
button corresponds to the
LOC
button in the GUI transport.
Operation
Many of the features, functions, and procedures of the Remote 48 mirror those of
the HDR24/96 and Remote 24, and are therefore already defined in the HDR24/96
and Remote 24 user’s manuals. Therefore keep your HDR24/96 Quick Start Guide,
HDR24/96 Technical Reference Manual, and Remote 24 User Guide on hand for
reference.
Transport
LOCATE
REWIND
FAST FWD
PLAY
STOP
RECORD
REWIND
FAST FWD
PLAY
RECORD
LOCATE
TAPE
TIME
LOCATE
TIME
TapeTime
Locate Time