Summary of S410s
Page 1
S410 s passive subwoofer user’s manual.
Page 2
2 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install n...
Page 3: Introduction
3 don’t forget to visit our website at www.Mackie.Com for more information about this and oth er mackie products. Introduction the woofers incoporate technology used in large-format touring systems and are virtually indestructible. Connecting and setting up the s410s is a breeze. It accepts a speake...
Page 4: Hookup Diagrams
4 hookup diagrams quick-start make all initial connections with the power switches off on all equip- ment. Make sure all master volume, level, or gain controls are all the way down. 1. Connect the line-level outputs from your mixing console (or other signal source) to the inputs of your power amplif...
Page 5
5 s410 s and s408: with a mixer and power amplifier s410 s and s408: with a mixer and two power amplifiers pole mount pole mount s410s s410s s408 s408 mixer or preamplifier right line-level output left line-level output stereo power amplifier 1202-vlz pro pole mount pole mount s410s s410s s408 s408 ...
Page 6: Connections
6 connections the s410s has two connectors labeled input and thru. These are both neutrik speakon™ connectors, which provide a secure and reliable connection for loud- speakers and subwoofers. These connectors are wired in parallel, and allow for connecting the input signal to another speaker’s inpu...
Page 7
7 • position the full-range loudspeakers so the high- frequency drivers are 2 to 4 feet above ear level for the audience (make allowances for a standing/ dancing in the aisles audience). High frequencies are highly directional and tend to be absorbed much easier than lower frequencies. By providing ...
Page 8: Repair
8 repair service for mackie products is available at a factory- authorized service center. Service for mackie products outside the united states can be obtained through local dealers or distributors. If your s410s needs ser vice, please fol low these in struc tions: 1. Review the preceding trou ble ...
Page 9: S410S Specifications
9 s410s specifications acoustic performance frequency range (–10 db) 40 hz–400 hz sensitivity 96.3 db @ 1 w/1 m max spl long-term 131 db @ 1m max spl peak 134 db @ 1m crossover point 180 hz, 12 db/octave woofer loading bass refl ex input/output input/thru type neutrik speakon™ input impedance (nomin...
Page 10: S410S Dimensions
10 s410s dimensions s410s frequency response on-axis 28.0 in/ 71.1 cm 25.0 in/ 63.5 cm 24.0 in/ 61.0 cm 25.0 in/ 63.5 cm 24.0 in/ 61.0 cm 24.0 in/ 61.0 cm frequency (hz) 20 100 1000 110 100 90 80 70 1/3 octave response db spl @ 2.83 v 1. Remove existing bolts. 2. Align fixed caster (part number 1500...
Page 11: S410S Limited Warranty
11 a. Loud technologies inc. Warrants all materials, workmanship and proper operation of this product for a period of two years from the original date of purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty per...
Page 12
16220 wood-red road ne • woodinville, wa 98072 • usa us and canada: 800.898.3211 europe, asia, central and south america: 425.487.4333 middle east and africa: 31.20.654.4000 fax: 425.487.4337 • www.Mackie.Com e-mail: sales@mackie.Com.