Mackie SRM 150 Compact Specifications
16
SRM150 SPECIFICATIONS
Transducer
Diameter
5.5 in/1 mm
Voice Coil Diameter
1.0 in/5. mm
Sensitivity (1W@1m)
90 dB
Nominal Impedance
8 ohms
Power Handling
150 watts
Frequency Range
90 Hz – 0 kHz
Magnet Type
Neodymium
Safety Features
Overload Protection
Limiter
Thermal Protection
Amplifier shutdown, auto-reset
Construction Features
Material
Polypropylene
Finish
Grey textured finish
Handle
Top mounted
Grille
Perforated metal with weather-
resistant coating
Physical Properties
Height
8.0 in/0. cm
Width
11. in/8. cm
Depth
6.8 in/17. cm
Weight
7.6 lb/. kg
Mounting Methods
Mic stand mountable via the built-in
socket on the bottom of the cabinet
with the supplied adapter.
AC Power Requirements
100 VAC – 0 VAC, 50/60 Hz, 5 VA
AC Connector
-pin IEC 50 VAC
Disclaimer
Since we are always striving to make our products better by
incorporating new and improved materials, components, and manu-
facturing methods, we reserve the right to change these specifica-
tions at any time without notice.
“Mackie.” and the “Running Man” figure are registered trade-
marks of LOUD Technologies Inc.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby acknowl-
edged.
©006 LOUD Technologies Inc.
All Rights Reserved.
System Specifications
Frequency Response (–3 dB)
100 Hz – 17.5 kHz
Frequency Range (–10 dB)
60 Hz – kHz
Max SPL Long-term @ 1m
110 dB
Max SPL Peak @ 1m
10 dB
Mixer Section
Frequency Response (–3 dB)
Mic Input to Line Out (Gain at 0 dB)
5 Hz – 0 kHz (+0, –1 dB)
Input Impedance
Mic
kohm balanced
Hi-Z
0 kohm balanced
Instrument
1 Mohm
Line
10 kohm balanced
Stereo
10 kohm balanced
Maximum Voltage Gain
Mic Input 1
51 dB
Mic Input
51 dB
Stereo Input
9 dB
Maximum Input Level
Mic
–8 dBu, gain at +50 dB
+15 dBu, gain at +6 dB
Line
–8 dBu, gain at +0 dB
+5 dBu, gain at –15 dB
Stereo
+0 dBu, gain at 0 dB
3-Band Equalization
High
±15 dB @ 1 kHz
Mid
±15 dB @ .5 kHz
Low
±15 dB @ 100 Hz
Line Out Pad
–0 dB
Common Mode Rejection Ratio (CMRR)
55 dB @ 1 kHz, gain at unity
Noise
(0 Hz to 0 kHz BW, 150 ohm source impedance)
Equivalent Input Noise (EIN)
–19 dBu
Residual Output Noise
(Line out, channel and master levels off)
–85 dBu
Power Amplifier
Rated Power
100 watts rms continuous,
0 Hz to 0 kHz
Maximum Power
150 watts peak
Rated THD
0.05%
Cooling
Convection Extrusion
Design
Class D
R