Macostar MacoLEDs R18/36-200C Operation Manual - page 4
Page 3 / 7
Operation Manual
3. Technical indexes
Input voltage
Working frequency
Normal ambient temp
Max output power
Dimension(mm)
Weight (kg)
100V~240VAC
50HZ/60HZ
0-35℃
100W/200W
(W)*(L)*(H)
4. Operational features
When using this product, you are recommended to follow this procedure: connect
the lamp to a power source, connect the lamp to a DMX signal line, turn the power switch
to "ON" position, and by now, the lamp enters into working state. If the interface displays
a DMX icon, you can use the console to control dimming, and if the interface displays a
Manual icon, you can directly rotate the encoder for light adjustment. In manual mode,
when you press the button you will exit dimming control and enter menu selection.
In addition to the DMX address for dimming control, dedicated DMX control
channels can be chosen for display duration of the LCD screen, LED light source module
protection, fan speed selection, built-in effects control. Such DMX values of different
channels can be set differently, through the control panel.
Factory defined configuration can be found in the following table:
Pa
ge 2
2 of 2
2
Page 6 / 7
Operation Manual
4). Selection LCD display duration:
When the LCD display duration icon is highlighted, press the button, and enter
address modification for display duration. If you want to change it, you can rotate the
encoder to the desired address value, and press the button to get option. If you want
to save the address value, press the Esc option to return to the first level menu;
If you want to select any other option, just press the button, and the control address
is then changed to “0” and the selected function character is displayed. Press the Esc
button to save the settings and return to the first level menu.
5. Select light source module protection mode:
When the Live or Safe icon is highlighted, press the desired button to enter address
modification of control mode. If you want to modify it to the desired address, rotate the
encoder to the desired value, press the button and get the
button to save the settings and return to the first level menu.
If you want to select any other option, just press the button, and the control address
is then changed to “0” and the selected function character is displayed. Press the Esc
button to save the settings and return to the first level menu.
Note: In Safe mode, the output brightness of the lamp will be restricted if
temperature of the LED light source module is over 65 centigrade degrees. Output
brightness will become less when the temperature is higher. When the temperature
reaches 75 centigrade degrees, output is “0”.
In Live mode, the output brightness of the lamp is “0” if the temperature of the LED
light source module reaches 90 centigrade degrees.
6). Select fan speed:
When the fan speed icon is highlighted, press this button to enter address
modification of fan speed. If you want to modify it to the desired address, rotate the
encoder to the desired value, press the button and get the
Option. Press the Esc
Option. Press the Esc
button to save the settings and return to the first level menu.
If you want to select any other option, just press the button, and the control address
is then changed to “0” and the selected function character is displayed. Press the Esc
button to save the settings and return to the first level menu.
Note: if temperature of the LED light source module is over 35 centigrade degrees,
the fan is turned on.
7). Select scene effects:
When the scene effect icon is highlighted, press this button to enter address
modification of scene effect. If you want to modify it to the desired address, rotate the
encoder to the desired value, press the button and get the
If you want to select any other option, just press the button, and the control address
is then changed to “0” and the selected function character is displayed. Press the Esc
button to save the settings and return to the first level menu.
Option. Press the Esc
Button to save the settings and return to the first level menu.
E
SC
EVER
30S
1Min
2Min
3Min
E
SC
Live
Safe
E
SC
Auto
Speed1
Speed2
Speed3
Speed4
E
SC
Effect1
Effect2
Effect3
Effect4
Effect5
Model
Maco LEDs
R8/22-200C
R18/36-200C
R30/
-200C
55
R8/22-200W
R18/
-200W
36
R30/
-200W
55
907*400*334 763*400*334 643*400*334 907*400*334 763*400*334 643*400*334
14.6
13.8
13.5
14.6
13.8
13.5
2. Product features
The light source module of Macostar series LED lamps can be set to different power
levels (100W or 200W ) and different color temperature levels (3200K or 5600K ),
according to different needs. The light source module is composed of a built-in PWM
power supplier, which provides working power supply. The output brightness can be
regulated through the DMX-512 signal controller, or through the manual dimmer knob.
Along with the power-down memory function.